Chrysler Sebring 2005 Service Manual page 1635

21 - 224 41TE AUTOMATIC TRANSAXLE
41TE AUTOMATIC TRANSAXLE (Continued)
Fig. 85 Guide Bracket
1 - GUIDE BRACKET
2 - ANTIRATCHET SPRING (MUST BE ASSEMBLED AS SHOWN)
3 - PAWL
(7) Install guide bracket into position and insert
pivot shaft (Fig. 86).
Fig. 86 Pivot Shaft and Guide Bracket
1 - ANTIRACHET SPRING
2 - GUIDE BRACKET
3 - PIVOT SHAFT
4 - PAWL
(8) Install anchor shaft and plug (Fig. 87). Make
sure guide bracket and split sleeve are in contact
with the rear of the transaxle case.
Fig. 87 Install Anchor Shaft and Plug
1 - GUIDE BRACKET ANCHOR SHAFT
2 - PIVOT SHAFT
3 - ANCHOR SHAFT PLUG
(9) Install low/reverse piston return spring (Fig.
88).
Fig. 88 Low/Reverse Piston Return Spring
1 - LOW/REVERSE PISTON RETURN SPRING
2 - PISTON
JR