Chrysler Sebring 2005 Service Manual page 1682

JR
FINAL DRIVE (Continued)
(15) Remove side gear thrust washers (Fig. 173).
Fig. 173 Side Gear Washer
1 - SIDE GEAR THRUST WASHER
(16) Remove remaining differential ring gear-to-
case bolts (Fig. 174).
Fig. 174 Ring Gear Bolt Removal/Installation
1 - RING GEAR BOLTS
(17) Using a soft-faced hammer, remove ring gear
from case (Fig. 175).
41TE AUTOMATIC TRANSAXLE
Fig. 175 Ring Gear Removal
1 - SOFT-FACED HAMMER
2 - RING GEAR
(18) Using Miller Special Tool L-4518, remove the
differential bearing race from the extension housing/
adapter plate.
(19) Using Miller Special Tool 6062A, remove the
differential bearing race from the bearing retainer
(Fig. 176) (Fig. 177).
Fig. 176 Position Bearing Cup Remover Tool in
1 - SPECIAL TOOL 6062A
2 - DIFFERENTIAL BEARING RETAINER
21 - 271
Retainer