Installation - Chrysler Sebring 2005 Service Manual

23 - 74 INSTRUMENT PANEL
INSTRUMENT PANEL ASSEMBLY (Continued)
1 - INSTRUMENT PANEL TO PLENUM SCREW
2 - INSTRUMENT PANEL STEERING COLUMN TO COWL
PLENUM SCREW
(5) Install the four steering column retaining bolts.
(6) Connect the transmission shift interlock and
wire connector.
(7) Connect all the column wiring and clip the har-
ness to the steering column.
(8) Install two screws to the steering column
shrouds.
(9) Connect the junction block wiring connectors.
(10) Install one bolt to the left side support strut
to bulkhead.
(11) Install five screws and one wire connector to
left lower instrument panel trim bezel (Refer to 23 -
BODY/INSTRUMENT
PANEL TRIM - INSTALLATION).
(12) Install the one left side, center instrument
panel support bolt.
(13) Install the left silencer.
(14) Install the four left A-pillar instrument panel
retainers.
(15) Connect the right door harness connectors
located within the A-pillar.
(16) Install the right A-pillar trim (Refer to 23 -
BODY/INTERIOR/A-PILLAR TRIM - INSTALLA-
TION).
(17) Install the left end cover (Refer to 23 - BODY/
INSTRUMENT PANEL/INSTRUMENT PANEL END
CAP - INSTALLATION).
Fig. 4 INSTRUMENT PANEL REMOVAL
PANEL/INSTRUMENT
3 - RIGHT COWL SIDE BOLTS
4 - INSTRUMENT PANEL CENTER BRACE TO FLOOR
5 - LEFT COWL SIDE BOLTS
(18) Install the two screws to the left cowl trim
panel (Refer to 23 - BODY/INTERIOR/COWL TRIM -

INSTALLATION).

(19) Install the left door sill plate (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM - INSTALLA-
TION).
(20) Install the one right side, center instrument
panel support bolt.
(21) Install the right silencer.
(22) Install the four right A-pillar instrument
panel retainers.
(23) Connect the right door harness connectors
located within the A-pillar.
(24) Install the glove box.
(25) Install the right A-pillar trim (Refer to 23 -
BODY/INTERIOR/A-PILLAR TRIM - INSTALLA-
TION).
(26) Install the right end cover (Refer to 23 -
BODY/INSTRUMENT
PANEL END CAP - INSTALLATION).
(27) Install the two screws to the right cowl trim
panel (Refer to 23 - BODY/INTERIOR/COWL TRIM -
INSTALLATION).
(28) Install the right door sill plate (Refer to 23 -
BODY/INTERIOR/DOOR SILL TRIM - INSTALLA-
TION).
(29) Connect the console wiring connectors and
clip the push in fasteners in.
JR
PANEL/INSTRUMENT