Chrysler Sebring 2005 Service Manual page 1758

JR
VALVE BODY (Continued)
(12) Install 2/4 Accumulator components as shown
in (Fig. 368).
Fig. 368 2/4 Accumulator Assembly
1 - VALVE BODY
2 - RETAINER PLATE
3 - DETENT SPRING
4 - RETURN SPRINGS
5 - PISTON
(13) Torque 2/4 Accumulator retainer to 5 N·m (45
in. lbs.) (Fig. 369).
Fig. 369 2/4 Accumulator Retaining Plate
1 - 2–4 ACCUMULATOR RETAINING PLATE
2 - DETENT SPRING
(14) Install Manual
Transmission Range Sensor (Fig. 370).
(15) Make sure Manual Valve control pin is con-
tained within the rooster comb slot (Fig. 371). Install
Transmission Range Sensor retaining screw (Fig.
371) and torque to 5 N·m (45 in. lbs.).
(16) Install manual shaft seal (Fig. 372).
Shaft/Rooster Comb
41TE AUTOMATIC TRANSAXLE
Fig. 370 Install Manual Shaft/Rooster Comb and
Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL SHAFT
3 - ROOSTER COMB
Fig. 371 Install Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
and
2 - MANUAL VALVE CONTROL PIN
3 - RETAINING SCREW
Retaining Screw
21 - 347