21 - 344
41TE AUTOMATIC TRANSAXLE
VALVE BODY (Continued)
(4) Verify that all retainers are installed as shown
in (Fig. 360). Retainers should be flush or below
valve body surface.
Fig. 360 Valve Retainer Location
1 - RETAINER
2 - RETAINER
(5) Install check balls into position as shown in
(Fig. 361). If necessary, secure them with petrolatum
or transmission assembly gel for assembly ease.
(6) Install thermal valve into transfer plate (Fig.
362).
(7) Install separator plate to valve body (Fig. 363).
JR