Chrysler Sebring 2005 Service Manual page 2119

24 - 46 DISTRIBUTION
HVAC HOUSING (Continued)
(13) Using a flat blade pry tool, disengage the lock-
ing tab on the access plate of the evaporator temper-
ature sensor. Turn the access plate clockwise one-
quarter turn and push the access plate inside of the
HVAC housing (Fig. 15), then orientate the plate in
such a way that it can be removed from the housing.
Fig. 15 Evaporator Temperature Sensor
1 - ACCESS PLATE
(14) Remove the evaporator temperature sensor
probe from the A/C evaporator and remove the sensor
(Fig. 16).
Fig. 16 Remove Probe
1 - EVAPORATOR TEMPERATURE SENSOR PROBE
(15) Lift the A/C evaporator out of the bottom half
of the HVAC housing (Fig. 17).
(16) Lift the heater core out of the bottom half of
the HVAC housing (Fig. 18).
Fig. 17 A/C Evaporator
1 - A/C EVAPORATOR
2 - HVAC HOUSING (LOWER HALF)
Fig. 18 Heater Core
1 - HEATER CORE
2 - HVAC HOUSING (BOTTOM HALF)
JR