Chrysler Sebring 2005 Service Manual page 1714

JR
INPUT CLUTCH ASSEMBLY (Continued)
(15) Install input clutch assembly to the Input
Clutch Pressure Fixture–Tool 8391 (Fig. 252).
Fig. 252 Input Clutch Assembly on Pressure Fixture
Tool 8391
1 - INPUT CLUTCH ASSEMBLY
2 - INPUT CLUTCH PRESSURE FIXTURE 8391
(16) Set up dial indicator on the UD clutch pack as
shown in (Fig. 253).
(17) Using moderate pressure, press down and
hold (near indicator) the UD clutch pack with screw-
driver or suitable tool and zero dial indicator (Fig.
254). When releasing pressure on clutch pack, indica-
tor reading should advance 0.005–0.010.
CAUTION: Do not apply more than 30 psi (206 kPa)
to the underdrive clutch pack.
(18) Apply 30 psi (206 kPa) to the underdrive hose
on Tool 8391 and measure UD clutch clearance. Mea-
sure and record UD clutch pack measurement in four
(4) places, 90° apart.
(19) Take average of four measurements and com-
pare with UD clutch pack clearance specification.
U n d e rd riv e c lu tc h p a c k c le a ra n c e m u s t be 0.94-
1.50 m m (0.037-0.059 in .).
(20) If necessary, select the proper reaction plate
to achieve specifications:
UNDERDRIVE REACTION PLATE THICKNESS
4659939AB 5.837-5.937 mm (0.230-0.234 in.)
4659940AB 6.147-6.248 mm (0.242-0.246 in.)
4659941AB 6.457-6.557 mm (0.254-0.258 in.)
41TE AUTOMATIC TRANSAXLE
Fig. 253 Set Up Dial Indicator to Measure UD Clutch
Clearance
1 - DIAL INDICATOR
2 - UNDERDRIVE CLUTCH
Fig. 254 Press Down on UD Clutch Pack and Zero
Dial Indicator
1 - DIAL INDICATOR
2 - UNDERDRIVE CLUTCH
(21) Install the OD clutch pack (four frictions/three
steels) (Fig. 255).
21 - 303