Chrysler Sebring 2005 Service Manual page 1478

JR
40TE AUTOMATIC TRANSAXLE (Continued)
(54) Remove rear carrier assembly from transaxle
(Fig. 64).
Fig. 64 Remove Rear Carrier Assembly
1 - REAR CARRIER ASSEMBLY
(55) Remove rear carrier assembly bearing cone
using setup shown in (Fig. 65).
Fig. 65 Remove Rear Carrier Bearing Cone
1 - TOOL 5048 WITH JAWS 5048–3 AND BUTTON 6055
2 - WRENCHES
3 - REAR CARRIER ASSEMBLY
40TE AUTOMATIC TRANSAXLE
(56) Install low/reverse spring compressor tool as
shown in (Fig. 66) (Fig. 67).
Fig. 66 Low/Reverse Spring Compressor Tool
1 - TOOL 6057
2 - TOOL 5059
3 - TOOL 5058–3
Fig. 67 Compressor Tool in Use
1 - LOW/REVERSE CLUTCH RETURN SPRING
2 - SNAP RING (INSTALL AS SHOWN)
3 - TOOL 6057
4 - TOOL 5059
5 - TOOL 5058–3
21 - 67