23 - 62
EXTERIOR
FRONT FENDER (Continued)
(9) Install mud guard.
(10) Install headlamp assembly.
(11) Check fender for flush and gap.
FUEL FILL DOOR
REMOVAL
(1) Open fuel filler door.
(2) Remove the two torx screws (Fig. 7).
(3) Remove fuel filler door from vehicle.
Fig. 7 Fuel Filler Door
1 - FUEL FILLER DOOR
2 - TORX SCREWS
1 - GRILLE (4)
2 - ATTACHING SCREW(S)
3 - FRONT FASCIA
INSTALLATION
(1) Place fuel filler door into position.
(2) Install the two torx screws.
(3) Ensure that door operates properly.
GRILLE
REMOVAL
REMOVAL - JR-41
(1) Remove front bumper fascia from the vehicle
(Refer to 13 - FRAMES & BUMPERS/BUMPERS/
FRONT FASCIA - REMOVAL).
(2) Unsnap upper and lower grille surround(s).
Using a trim stick if necessary (Fig. 8).
(3) Remove screws attaching grille.
(4) Remove grille from fascia.
Fig. 8 FRONT GRILLE - JR-41
4 - UPPER GRILLE SURROUND
5 - LOWER GRILLE SURROUND
JR