Chrysler Sebring 2005 Service Manual page 1636

JR
41TE AUTOMATIC TRANSAXLE (Continued)
(10) Install low/reverse spring compressor into
position (Fig. 89). Compress low/reverse piston and
install snap ring as shown in (Fig. 90).
Fig. 89 Compressor Tool in Use
1 - LOW/REVERSE CLUTCH RETURN SPRING
2 - SNAP RING (INSTALL AS SHOWN)
3 - TOOL 6057
4 - TOOL 5059
5 - TOOL 5058–3
Fig. 90 Install Snap Ring
1 - SNAP RING OPENING MUST BE BETWEEN SPRING LEVERS
(AS SHOWN)
2 - SNAP RING PLIERS
3 - TOOL 6057
41TE AUTOMATIC TRANSAXLE
(11) Install rear carrier bearing cone using Tool
6053 (Fig. 91).
Fig. 91 Install Rear Carrier Bearing Cone
1 - ARBOR PRESS RAM
2 - TOOL 6053
3 - NEW BEARING CONE
4 - REAR CARRIER ASSEMBLY
(12) Install rear carrier assembly to transaxle case
(Fig. 92).
Fig. 92 Install Rear Carrier Assembly
1 - REAR CARRIER ASSEMBLY
21 - 225