A-Pillar Trim - Chrysler Sebring 2005 Service Manual

23 - 84 INTERIOR
A-PILLAR TRIM (Continued)

1 - A-PILLAR TRIM

2 - BEZEL - B-PILLAR LOWER
3 - UPPER B-PILLAR TRIM
4 - UPPER QUARTER TRIM
5 - LOWER QUARTER TRIM
(2) Disengage clips attaching A-pillar trim panel to
A-pillar.
(3) Remove trim panel from vehicle (Fig. 2).
INSTALLATION
INSTALLATION
(1) Place A-pillar trim into position.
(2) Engage clips attaching A-pillar trim to A-pillar.
(3) Install the door opening weatherstrip to the
A-pillar. (Refer to 23 - BODY/WEATHERSTRIP/
SEALS/DOOR OPENING
INSTALLATION)
INSTALLATION - JR-27 ONLY
(1) Position trim panel near A-pillar.
(2) Align locating pins on back side of trim panel
to holes in A-pillar.
(3) Press clips on A-pillar trim panel into slots in
A-pillar.
Fig. 1 INTERIOR TRIM PANELS
WEATHERSTRIP -
6 - SEAT BELT
7 - SCUFF PLATE
8 - LOWER B-PILLAR TRIM
9 - SCUFF PLATE
10 - COWL TRIM
Fig. 2 A-Pillar Trim Panel
1 - A-PILLAR
2 - A-PILLAR TRIM PANEL
3 - LOCATOR(S)
4 - CLIP(S)
JR