Chrysler Sebring 2005 Service Manual page 1710

JR
INPUT CLUTCH ASSEMBLY (Continued)
Fig. 240 Underdrive Clutch Piston
1 - PISTON
Fig. 241 Seal Compressor Special Tool 5067
1 - PISTON RETURN SPRING
2 - SPECIAL TOOL 5067
3 - INPUT SHAFT CLUTCHES RETAINER ASSEMBLY
(9) Using Tool 5059A and an arbor press, Install
the UD spring retainer and snap ring (Fig. 242) (Fig.
243) (Fig. 244) Compress just enough to install snap
ring.
CAUTION: Compress return spring just enough to
install snap ring.
41TE AUTOMATIC TRANSAXLE
Fig. 242 UD Return Spring and Retainer
1 - UNDERDRIVE SPRING RETAINER
2 - SNAP RING
3 - SEAL
4 - PISTON RETURN SPRING
Fig. 243 Install UD Spring Retainer and Snap Ring
1 - ARBOR PRESS RAM
2 - SNAP RING PLIERS
3 - SNAP RING
4 - OD/REVERSE PISTON
5 - TOOL 5067
6 - TOOL 5059A
21 - 299