Chrysler Sebring 2005 Service Manual page 1596

JR
VALVE BODY (Continued)
DISASSEMBLY
NOTE: If valve body assembly is being recondi-
tioned, the PCM/TCM Quick Learn Procedure must
be performed. (Refer to 8 - ELECTRICAL/ELEC-
TRONIC CONTROL
CONTROL MODULE - STANDARD PROCEDURE)
(1) Remove manual shaft seal (Fig. 337).
Fig. 337 Manual Shaft Seal
1 - SEAL
2 - MANUAL SHAFT
(2) Remove Transmission Range Sensor retaining
screw (Fig. 338).
(3) Remove Manual
Transmission Range Sensor (Fig. 339).
MODULES/TRANSMISSION
Shaft/Rooster Comb
40TE AUTOMATIC TRANSAXLE
Fig. 338 Remove Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL VALVE CONTROL PIN
3 - RETAINING SCREW
and
Fig. 339 Manual Shaft/Rooster Comb and
Transmission Range Sensor
1 - TRANSMISSION RANGE SENSOR
2 - MANUAL SHAFT
3 - ROOSTER COMB
21 - 185