Installation - Chrysler Sebring 2005 Service Manual

JR
SIDE RAIL WEATHERSTRIP (Continued)
REAR
(1) Partially raise convertible top.
(2) Remove push in fasteners attaching weather-
strip to retainer.
(3) Separate weatherstrip from vehicle (Fig. 26).
Fig. 26 Rear Side Rail
1 - CONVERTIBLE TOP
2 - REAR SIDE RAIL WEATHERSTRIP
3 - QUARTER PANEL

INSTALLATION

FRONT
(1) Position weatherstrip on vehicle.
WEATHERSTRIP/SEALS
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Lower convertible top.
(4) Secure convertible top.
CENTER
(1) Position weatherstrip on vehicle.
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Lower convertible top.
(4) Secure convertible top.
REAR
(1) Position weatherstrip on vehicle.
(2) Install push in fasteners into retainer channel,
aligning embossment on back side of weatherstrip to
corner of retainer.
(3) Push weatherstrip into retainer channel, align-
ing embossment on backside of weatherstrip to cor-
ner of retainer.
(4) Lower convertible top.
(5) Secure convertible top.
23 - 149