Chrysler Sebring 2005 Service Manual page 1759

21 - 348 41TE AUTOMATIC TRANSAXLE
VALVE BODY (Continued)
Fig. 372 Manual Shaft Seal
1 - SEAL
2 - MANUAL SHAFT
INSTALLATION
NOTE: If valve body assembly is being replaced or
reconditioned, it is necessary to perform the PCM
Quick Learn Procedure. (Refer to 8 - ELECTRICAL/
ELECTRONIC CONTROL MODULES/TRANSMISSION
CONTROL MODULE - STANDARD PROCEDURE)
(1) Install underdrive and overdrive accumulators
(Fig. 373).
Fig. 373 Underdrive and Overdrive Accumulators
1 - OVERDRIVE PISTON AND SPRING
2 - UNDERDRIVE PISTON AND SPRING
(2) Install valve body assembly to transaxle (Fig.
374). Install and torque valve body-to-transaxle case
bolts (Fig. 375) to 12 N·m (105 in. lbs.).
Fig. 374 Valve Body Removal/Installation
1 - VALVE BODY
Fig. 375 Valve Body-to-Case Bolts
1 - VALVE BODY ATTACHING BOLTS (18)
2 - VALVE BODY
JR