Chrysler Sebring 2005 Service Manual page 1571

21 - 160 40TE AUTOMATIC TRANSAXLE
OIL PUMP (Continued)
(3) Remove the pump gears (Fig. 277) and check
for wear and damage on pump housing and gears.
Fig. 277 Oil Pump Assembly
1 - PUMP BODY
2 - OUTER GEAR
3 - INNER GEAR
4 - REACTION SHAFT SUPPORT
5 - SEAL RINGS (4)
6 - REACTION SHAFT
7 - CRESCENT
(4) Re-install the gears and check clearances.
(5) Measure the clearance between the outer gear
and the pump pocket (Fig. 278). Clearance should be
0.089–0.202 mm (0.0035-0.0079 in.).
Fig. 278 Measuring Outer Gear-to-Pocket
1 - FEELER GAUGE
2 - OUTER GEAR
3 - PUMP BODY
(6) Measure clearance between outer gear and
crescent (Fig. 279). Clearance should be 0.060-0.298
mm (0.0023-0.0117 in.).
Fig. 279 Measuring Outer Gear-to-Crescent
1 - FEELER GAUGE
2 - OUTER GEAR
3 - CRESCENT
4 - INNER GEAR
(7) Measure clearance between inner gear and
crescent (Fig. 280). Clearance should be 0.093-0.385
mm (0.0036-0.0151 in.).
Fig. 280 Measuring Inner Gear-to-Crescent
1 - FEELER GAUGE
2 - OUTER GEAR
3 - CRESCENT
4 - INNER GEAR
JR