Chrysler Sebring 2005 Service Manual page 1476

JR
40TE AUTOMATIC TRANSAXLE (Continued)
(46) Using tool P-334, press transfer shaft bearing
cone off of shaft (Fig. 56).
Fig. 56 Remove Transfer Shaft Bearing Cone
1 - ARBOR PRESS RAM
2 - TRANSFER SHAFT
3 - TOOL P-334
4 - BEARING CONE
(47) Bend output gear retaining strap ears flat to
allow bolt removal.
(48) Remove output shaft stirrup strap bolts (Fig.
57).
Fig. 57 Remove Strap Bolts
1 - RETAINING STRAP
2 - STIRRUP
3 - RETAINING STRAP BOLTS
40TE AUTOMATIC TRANSAXLE
(49) Remove stirrup and strap (Fig. 58).
Fig. 58 Remove Stirrup Strap
1 - OUTPUT GEARBOLT
2 - RETAINING STRAP
3 - STIRRUP
(50) Using Tool 6259 (Fig. 59), remove output shaft
gear-to-shaft bolt and washer (Fig. 60).
Fig. 59 Remove Output Gear Bolt
1 - OUTPUT GEAR
2 - TOOL 6259
21 - 65