Chrysler 2007 LX 300C User Manual

page of 432

/ 432
Contents
Table of Contents
Bookmarks

Table of Contents

Quick Links

Download this manual

SECTION

INTRODUCTION

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATING

WHAT TO DO IN EMERGENCIES

MAINTAINING YOUR VEHICLE

MAINTENANCE SCHEDULES

IF YOU NEED CONSUMER ASSISTANCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 413

INDEX

TABLE OF CONTENTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 311

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 327

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 385

. . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 405

PAGE

Table of Contents

Chapters

Table of Contents

Need help?

Do you have a question about the 2007 LX 300C and is the answer not in the manual?

Questions and answers

Summary of Contents for Chrysler 2007 LX 300C

Page 1: Introduction
TABLE OF CONTENTS SECTION PAGE ............. 3 INTRODUCTION .
Page 3: Table Of Contents
INTRODUCTION CONTENTS Introduction ......4 Vehicle Identification Number ....6 How To Use This Manual .
Page 4: Introduction
4 INTRODUCTION INTRODUCTION WARNING! This manual has been prepared with the assistance of service and engineering specialists to acquaint you with Engine exhaust, some of its constituents and certain the operation and maintenance of your new vehicle. It is vehicle components contain or emit chemicals supplemented by a Warranty Information Booklet and known to the State of California to cause cancer and various customer oriented documents.
Page 5 INTRODUCTION 5...
Page 6: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This manual contains WARNINGS against operating procedures, which could result in an accident or bodily injury. It also contains CAUTIONS against procedures, which could result in damage to your vehicle. If you do not read this entire manual, you may miss important information.
Page 7: Vehicle Modifications / Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS / ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
Page 9 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS A Word About Your Keys ....11 Illuminated Entry System ....17 ▫...
Page 10 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Power Door Locks .....23 ▫ Seat Belts And Pregnant Women ... .40 ▫...
Page 11: A Word About Your Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 A WORD ABOUT YOUR KEYS Ignition Key Removal You can insert the double-sided keys into the locks with The shift lever must be in PARK. Turn the key to the either side up. LOCK position, and then remove the key.
Page 12: Key-In-Ignition Reminder
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles equipped with the Electronic Vehicle CAUTION! Information Center (EVIC), the power window switches, radio, power sunroof (if equipped), and An unlocked car is an invitation to thieves. Always power outlets will remain active for up to 60 minutes remove key from the ignition and lock all doors after the ignition switch is turned off.
Page 13: Sentry Key
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 SENTRY KEY someone used an invalid key to start the engine. Either of The Sentry Key Immobilizer System prevents unautho- these conditions will result in the engine being shut off rized vehicle operation by disabling the engine. The after two (2) seconds.
Page 14: Replacement Keys
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All of the keys provided with your new vehicle have Customer Key Programming been programmed to the vehicle electronics. If you have two valid sentry keys, you can program new sentry keys to the system by performing the following Replacement Keys procedure: NOTE: Only keys that are programmed to the vehicle...
Page 15: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 The new Sentry Key is programmed. The Keyless Entry SECURITY ALARM SYSTEM — IF EQUIPPED Transmitter will also be programmed during this pro- The Vehicle Security Alarm system monitors the vehicle doors for unauthorized entry and the ignition switch for cedure.
Page 16: To Disarm The System
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE system is not arming. Also, if you open a door during the The Vehicle Security Alarm system is designed to protect arming period, the system will cancel the arming process. your vehicle; however, you can create conditions where If you wish to rearm the system after closing the door, the system will give you a false alarm.
Page 17: Illuminated Entry System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 ILLUMINATED ENTRY SYSTEM REMOTE KEYLESS ENTRY The courtesy lights will turn on when you use the keyless This system allows you to lock or unlock the doors, open entry transmitter or open any door. the trunk, or activate the panic alarm from distances up to about 23 feet (7 meters) using a hand held radio This feature also turns on the approach lighting in the...
Page 18: To Unlock The Doors
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Press and hold the LOCK button on a programmed To unlock the doors: Press and release the UNLOCK button on the transmitter transmitter for at least 4 seconds, but not longer than 10 once to unlock the driver’s door, or twice to unlock all seconds.
Page 19 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 Flash Lights with Remote Key Lock 3. Test the feature while outside of the vehicle, by This feature will cause the turn signal lights to flash when pressing the LOCK/UNLOCK buttons on the transmitter the doors are locked or unlocked with the transmitter.
Page 20: To Lock The Doors
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Release both buttons at the same time. To lock the doors: Press and release the LOCK button on the transmitter to 3. Test the feature while outside of the vehicle, by lock all doors.
Page 21: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 The panic alarm will stay on for 3 minutes unless you Battery Replacement turn it off by either pressing the PANIC button a second The recommended replacement battery is CR2032. time or drive the vehicle at a speed of 15 mph (24 km/h) NOTE: Do not touch the battery terminals that are on or greater.
Page 22: General Information
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Remove and replace the battery. Avoid touching the 1. A weak battery in the transmitter. The expected life of new battery with your fingers. Skin oils may cause the battery is a minimum of three years. battery deterioration.
Page 23: Power Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 If the door lock plunger is down when you shut the door, Power Door Locks the door will lock. Therefore, make sure the keys are not A power door lock switch is on each front door trim inside the vehicle before closing the door.
Page 24 24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE chime will sound if the key is in the LOCK or ACC (Customer Programmable Features)” under “Elec- position and a door is open, as a reminder to remove the tronic Vehicle Information Center (EVIC)” in Section 4 key.
Page 25: Child Protection Door Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, performing Automatic Unlock Doors on Exit The doors will unlock automatically on vehicles with the following procedure: power door locks if: 1. Close all doors and place the key in the ignition. 1.
Page 26 26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: When the child lock system is engaged, the door To Engage the Child Protection Door Lock can be opened only by using the outside door handle 1. Open the rear door. even though the inside door lock is in the unlocked 2.
Page 27: Windows
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 To Disengage the Child Protection Door Lock WINDOWS 1. Open the rear door. Power Windows The window controls on the driver’s door control all the 2. Insert the tip of the vehicle’s ignition key or alike into door windows.
Page 28 28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE For vehicles not equipped with the Electronic Vehicle WARNING! Information Center (EVIC), the power window switches will remain active for 10 minutes after the ignition switch Never leave children in a vehicle, with the keys in is turned off.
Page 29 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 To close the window part way, lift the window switch to NOTE: • If the window runs into any obstacle during auto- the first detent and release it when you want the window to stop.
Page 30: Wind Buffeting
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Window Lockout Switch Reset The window lockout switch on the driver’s door allows Any time the vehicle battery is disconnected, or goes you to disable the window controls on the passenger dead, the auto-up function will be disabled. To reactivate doors.
Page 31: Trunk Lock And Release
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 buffeting occurs with the sunroof open, then adjust the The trunk lid can be released from outside the vehicle by sunroof opening to minimize the buffeting. pressing the trunk button on the Remote Keyless Entry Transmitter two times.
Page 32: Trunk Emergency Release
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Trunk Emergency Release OCCUPANT RESTRAINTS Some of the most important safety features in your vehicle are the restraint systems. These include the front and rear seat belts for the driver and all passengers, front airbags for both the driver and front passenger and, if so equipped, side curtain airbags for the driver and passen- gers seated next to a window.
Page 33: Lap/Shoulder Belts
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Lap/Shoulder Belts WARNING! All seating positions in your vehicle are equipped with Lap/Shoulder Belts. In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- The belt webbing retractor is designed to lock during led up.
Page 34 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions WARNING! 1. Enter the vehicle and close the door. Sit back and • It is extremely dangerous to ride in a cargo area, adjust the front seat. inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously 2.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 3. When the belt is long enough to fit, insert the latch WARNING! plate into the buckle until you hear a “click.” • A belt that is buckled into the wrong buckle will not protect you properly.
Page 36 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 4. Position the lap belt across your thighs, below your WARNING! abdomen. To remove slack in the lap belt portion, pull up • A lap belt worn too high can increase the risk of a bit on the shoulder belt.
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically, checking for cuts, frays, or loose parts. Damaged parts must be replaced immediately. Do not disassemble or modify the system.
Page 38: Lap/Shoulder Belt Untwisting Procedure
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: These devices are not a substitute for proper Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ seat belt placement by the occupant. The seat belt still shoulder belt.
Page 39: Automatic Locking Mode - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 BeltAlert Programming NOTE: Watch for the Seat Belt Reminder Light to turn The Enhanced Warning System (BeltAlert) can be en- on while unbuckling the seat belt and turn off while abled or disabled by your authorized dealer or by re-buckling the seat belt.
Page 40: Seat Belts And Pregnant Women
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE distinctive label on the webbing. Children 12 years old Seat Belts and Pregnant Women and under should be properly restrained in the rear seat We recommend that pregnant women use the seat belts whenever possible.
Page 41: Driver And Front Passenger Supplemental Restraint System (Srs) - Airbag
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 mounted in the instrument panel, above the glove com- WARNING! partment. The words SRS AIRBAG are embossed on the airbag covers. Using a seat belt extender when not needed can increase the risk of injury in a collision. Only use when the seat belt is not long enough when it is worn low and snug, and in the recommended seating positions.
Page 42 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE This vehicle may also be equipped with side curtain WARNING! airbags to protect the driver and passengers sitting next • to a window. If the vehicle is equipped with side curtain Do not put anything on or around the front airbag airbags, they are located above the side windows.
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: Do not use a clothing bar mounted to the coat 2. Infants in rear-facing child restraints should NEVER hooks in this vehicle. A clothing bar will impede the ride in the front seat of a vehicle with a passenger front proper performance of the curtain airbags.
Page 44 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 8. The driver and front passenger seats should be moved WARNING! back as far as practical to allow the airbags time to inflate. • Relying on the airbags alone could lead to more 9.
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 Air Bag System Components How The Airbag System Works • The Airbag Control Module (ACM) determines if a The airbag system consists of the following: frontal collision is severe enough to require the airbags •...
Page 46 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE driver’s front airbag gas is vented through vent holes WARNING! in the sides of the airbag. The passenger’s front airbag gas is vented through vent holes in the sides of the Ignoring the AIRBAG Warning Light in your instru- airbag.
Page 47 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 • The Knee Impact Bolsters help protect the knees of However, if you haven’t healed significantly within a the driver and the front passenger, and position every- few days, or if you have any blistering, see your doctor one for the best interaction with the front airbag.
Page 48 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Maintaining Your Airbag System WARNING! Deployed airbags can’t protect you in another colli- WARNING! sion. Have the airbags replaced by an authorized • Modifications to any part of the airbag system dealer as soon as possible. could cause it to fail when you need it.
Page 49: Event Data Recorder (Edr)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 Airbag Warning Light the electronic data may be used by DaimlerChrysler and You will want to have the airbags ready to others to learn more about the possible causes of crashes inflate for your protection in an impact. While and associated injuries in order to assess and improve the airbag system is designed to be mainte- vehicle performance.
Page 50: Child Restraint
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Airbag deployment level (if applicable) treated confidentially. Confidential data will not be dis- closed by DaimlerChrysler to any third party except • Seatbelt status when: • Brake status (service and parking brakes) 1.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 one year old and weigh at least 20 lbs (9 kg). Two types WARNING! of child restraints can be used rearward-facing: infant carriers and “convertible” child seats. In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle.
Page 52 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Older Children and Child Restraints Children Too Large For Booster Seats Children who weigh more than 20 lbs (9 kg) and who are Children who are large enough to wear the shoulder belt older than one year can ride forward-facing in the comfortably, and whose legs are long enough to bend vehicle.
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • The restraint must be appropriate for your child’s WARNING! weight and height. Check the label on the restraint for • Improper installation can lead to failure of an weight and height limits. infant or child restraint.
Page 54 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE All three rear-seating positions have lower anchorages LATCH — Child Seat Anchorage System (Lower Anchors and Tether for CH ildren) that are capable of accommodating LATCH-compatible Your vehicle’s rear seat is equipped with the child child seats.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Installing the LATCH-Compatible Child Restraint Many, but not all restraint systems will be equipped with System separate straps on each side, with each having a hook or We urge that you carefully follow the directions of the connector for attachment to the lower anchorage and a manufacturer when installing your child restraint.
Page 56 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: WARNING! • Ensure that the tether strap does not slip into the opening between the seat backs as you remove slack in Improper installation of a child restraint to the the strap. LATCH anchorages can lead to failure of an infant or child restraint.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 a child restraint to be tightly installed. Refer to “Auto- plate into the buckle again. If you still can’t make the matic Locking Mode” in this section for details. A locking child restraint secure, try a different seating position. clip should not be necessary once the automatic locking To attach a child restraint tether strap: feature is enabled.
Page 58: Engine Break-In Recommendations
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 3. Attach the tether strap hook (A) of the child restraint to Pets should be restrained in the rear seat in pet harnesses the anchor (B) and remove slack in the tether strap or pet carriers that are secured by seat belts.
Page 59: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 A new engine may consume some oil during its first few Lock Your Vehicle thousand miles (kilometers) of operation. This should be Always remove the keys from the ignition and lock all considered as a normal part of the break-in and not doors when leaving the vehicle unattended, even in your interpreted as an indication of difficulty.
Page 60: Safety Checks You Should Make Inside The Vehicle
60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE damaged, deteriorated, or mispositioned parts. Open Safety Checks You Should Make Inside The seams or loose connections could permit exhaust fumes Vehicle to seep into the passenger compartment. In addition, Seat Belts inspect the exhaust system each time the vehicle is raised Inspect the belt system periodically, checking for cuts, for lubrication or oil change.
Page 61: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 Defroster Lights Check operation by selecting the defrost mode and place Have someone observe the operation of exterior lights the blower control on high speed. You should be able to while you work the controls. Check turn signal and high feel the air directed against the windshield.
Page 63: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Heated Remote Control Mirrors — Mirrors ......68 If Equipped .
Page 64 64 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Headlight Switch ..... 103 Seats ....... .92 ▫...
Page 65 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 65 ▫ Headlights On With Wipers ▫ To Vary The Speed Setting ....120 (Available With Auto Headlights Only) ..111 ▫...
Page 66 66 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ General Information ....136 ▫ Pinch Protect Feature ....147 ▫...
Page 67 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 67 ▫ Cargo Area ......153 Storage ......153 ▫...
Page 68: Mirrors
68 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Inside Mirror — If Equipped This mirror automatically adjusts for annoying headlight Inside Day/Night Mirror glare from vehicles behind you. You can turn the feature Adjust the mirror to center on the view through the rear on or off by pressing the button at the base of the mirror.
Page 69: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 69 WARNING! CAUTION! Vehicles and other objects seen in the passenger side To avoid damage to the mirror during cleaning, convex mirror will look smaller and farther away never spray any cleaning solution directly onto the than they really are.
Page 70: Outside Mirrors With Turn Signal & Approach Lighting - If Equipped
70 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors with Turn Signal & Approach Tilt in Reverse Feature — If Equipped Lighting — If Equipped The Tilt in Reverse feature tilts the outside rearview Driver and passenger outside mirrors with turn signal mirrors downward when the ignition switch is in the ON and approach lighting contain four LEDs, which are position and the transmission is in the R (Reverse)
Page 71: Heated Remote Control Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 71 After selecting a mirror, move the knob in the same Heated Remote Control Mirrors — If Equipped direction you want the mirror to move. Use the center off These mirrors are heated to melt frost or ice. This feature position to guard against accidentally moving a mirror is activated whenever you turn on the Rear Window position.
Page 72: Hands-Free Communication (Uconnect™) - If Equipped
UConnect™ system. The UConnect™ system phone equipped with the Bluetooth Hands-Free Profile, allows up to seven cellular phones to be linked to system. version 0.96 or higher. See www.chrysler.com/uconnect Only one linked (or paired) cellular phone can be used for supported phones.
Page 73: Operations
• Prior to giving a voice command, one must wait for Free Profile certified Bluetooth™ cellular phone. See the voice on beep, which follows the Ready prompt www.chrysler.com/uconnect for supported phones. If or another prompt. your cellular phone supports a different profile (e.g., Headset Profile), you may not be able to use any UCon- nect™...
Page 74 NOTE: The UConnect™ system use requires a cellular sitting eight feet away from you. phone equipped with the Bluetooth Hands-Free Profile, version 0.96 or higher. See www.chrysler.com/uconnect Voice Command Tree for supported phones. Refer to “Voice Tree” at the end of this section.
Page 75 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 75 • For identification purposes, you will be prompted to NOTE: • www.chrysler.com/uconnect give the UConnect™ system a name for your cellular phone. Each cellular phone that is paired should be • www.dodge.com/uconnect given a unique phone name.
Page 76 76 UNDERSTANDING THE FEATURES OF YOUR VEHICLE you can say John Doe, where John Doe is a previ- Call/Dial by Saying a Number ously stored name entry in the UConnect™ phone- • Press the ’Phone’ button to begin. book. Refer to Add Names to Your UConnect™ •...
Page 77 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 77 • When prompted, enter the number designation (e.g., • After the Ready prompt and the following beep, say Home, Work, Mobile, or Pager ). This will allow Phonebook Edit. you to store multiple numbers for each phonebook •...
Page 78 78 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Note that only the phonebook entry in the current Delete Entries in the UConnect™ Phonebook language is deleted. NOTE: Editing phonebook entries is recommended when vehicle is not in motion. After confirmation, the phonebook entries will be de- leted.
Page 79: Phone Call Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 79 List All Names in the UConnect™ Phonebook accessed through the UConnect™ system. Check with your cellular service provider for the features that you • Press the ’Phone’ button to begin. have. • After the Ready prompt and the following beep, say Answer or Reject an Incoming Call - No Call Phonebook List Names.
Page 80 80 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Making a Second Call while Current Call in Conference Call Progress When two calls are in progress (one active and one on To make a second call while you are currently in a call, hold), press and hold the ’Phone’...
Page 81: Uconnect™ System Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 81 • After ignition key is switched to off, a call can continue Redial on the UConnect™ system for certain duration, after • Press the ’Phone’ button to begin. which the call is automatically transferred from the •...
Page 82 82 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: After every UConnect™ language change op- Canada and 060 for Mexico). The number dialed may not eration, only the language specific 32-name phonebook is be applicable with the available cellular service and area. usable.
Page 83 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 83 Please refer to the 24-Hour “Towing Assistance” cover- When calling a number with your UConnect™ system age details in the Warranty information booklet and on that normally requires you to enter in a touch-tone the 24–Hour Towing Assistance Card.
Page 84 84 UNDERSTANDING THE FEATURES OF YOUR VEHICLE dialing via the cell phone keypad, the user must exercise Turning Confirmation Prompts On/Off Turning confirmation prompts off will stop the system caution and take precautionary safety measures). By from confirming your choices (e.g., the UConnect™ dialing a number with your paired Bluetooth™...
Page 85: Advanced Phone Connectivity
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 85 In order to un-mute the UConnect™ system: Connect or Disconnect Link Between the UConnect™ System and Cellular Phone • Press the ’Voice Recognition’ button. Your cellular phone can be paired with many different •...
Page 86: Things You Should Know About Your Uconnect™ System
86 UNDERSTANDING THE FEATURES OF YOUR VEHICLE button and say “Select” or “Delete.” Also, see the next Delete UConnect™ Paired Cellular Phones two sections for an alternate way to “select” or “de- • Press the ’Phone’ button to begin. lete” a paired phone. •...
Page 87 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 87 • Performance is maximized under: • UConnect™ phonebook nametag recognition rate is optimized for the voice of the person who stored the • low-to-medium blower setting, name in the phonebook. • low-to-medium vehicle speed, •...
Page 88 88 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Performance, such as audio clarity, echo, and loudness switching the phone off/on. Your cell phone is recom- to a large degree rely on the phone and network, and mended to remain in Bluetooth on mode. not the UConnect™...
Page 89 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 89...
Page 90 90 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 91 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 91...
Page 92: Seats
92 UNDERSTANDING THE FEATURES OF YOUR VEHICLE SEATS North American English Primary Alternate(s) Power Seats The power seat switch is on the outboard side of the seat Zero near the floor. Use this switch to move the driver’s seat Add location Add new up or down, forward or rearward, or to tilt the seat.
Page 93: Power Reclining Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 93 WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 94: Lumbar Support
94 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Lumbar Support Head Restraints This feature allows you to increase or decrease the Head restraints can reduce the risk of whiplash injury in amount of lumbar support. Turn the control lever for- the event of impact from the rear. Adjustable restraints ward to increase and rearward to decrease the desired should be adjusted so that the upper edge is as high as amount of lumbar support.
Page 95: Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95 Heated Seats — If Equipped On vehicles equipped with rear heated seats, the seats Heated seats, which are available only with leather closest to the doors are heated. The controls for these upholstery, provide comfort and warmth on cold days seats are located on the rear of the center console.
Page 96 96 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Press the switch once to select high-level heating. Press WARNING! the switch a second time to select low-level heating. Press the switch a third time to shut off the heating elements. Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, If high-level heating is selected, the system will automati- spinal cord injury, medication, alcohol use, exhaus-...
Page 97: Folding Rear Seat
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 97 Folding Rear Seat WARNING! • Be certain that the seatback is securely locked into position. If the seatback in not securely locked into position the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious in- jury.
Page 98: Driver Memory Seat - If Equipped
98 UNDERSTANDING THE FEATURES OF YOUR VEHICLE DRIVER MEMORY SEAT — IF EQUIPPED This feature allows the driver to store up to two different memory profiles, for easy recall through a memory switch. Each memory profile contains desired position settings for the driver seat, side mirror, adjustable pedals (if equipped), and power tilt and telescopic steering column (if equipped), and a set of desired radio station presets.
Page 99: Linking & Unlinking The Remote Keyless Transmitter To The Memory Feature
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 99 2. Press and release the Set (S) button on the memory Information Center (EVIC) — if equipped. For details, switch, then press the side of the rocker switch labeled (1) refer to “Personal Settings (Customer Programmable within 5 seconds.
Page 100: Memory Position Recall
100 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 4. Press and release the LOCK button on the transmitter A recall can be cancelled by pressing any of the memory within 10 seconds. buttons (S, 1, or 2) on the drivers door during a recall. When a recall is cancelled, the driver seat, side mirror, NOTE: Your transmitters can be unlinked to your...
Page 101: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 101 • When you remove the key from the ignition switch, TO OPEN AND CLOSE THE HOOD the driver seat will move to a position 1.2 inches (30 Two latches must be released to open the hood. First, pull mm) forward of the rear stop if the driver seat position the hood release lever located under the left side of the is between 2.4 inches and 3.5 inches (60 mm and 90...
Page 102 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Next, move to the outside of the vehicle and push the To prevent possible damage, do not slam the hood to safety catch to the left. The safety catch is located under close it. Lower the hood, until it is open approximately 6 the center front edge of the hood.
Page 103: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 LIGHTS Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. Headlight Switch Turn it to the second detent for headlight, parking light, The headlight switch is located on the left side of and instrument panel light operation.
Page 104: Headlights On With Wipers (Available With Auto Headlights Only)
104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Headlights On with Wipers feature can be turned on or off through the Electronic Vehicle Information Center (EVIC) — if equipped. For details, refer to ”Headlights On with Wipers,” under “Personal Settings (Customer Programmable Features),”...
Page 105: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 3. Push the Multi-Function Lever away from you to Headlight Time Delay switch the headlights to the HIGH BEAM position. This feature provides the safety of headlight illumination for 90 seconds (programmable) when leaving your ve- NOTE: This system will not activate until the vehicle is hicle in an unlighted area.
Page 106: Daytime Running Lights (Canada Only)
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Daytime Running Lights (Canada Only) Multi-Function Lever The high beam headlights will come on as Daytime The multi-function lever controls the operation of the Running Lights, whenever the ignition switch is on, the turn signals, headlight beam selection, and passing headlights are off, and the parking brake is off.
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 Turn Signals equipped and a continuous chime will sound if the Move the Multi-Function Lever up or down and the vehicle is driven more than 1 mile (1.6 km) with either corresponding turn signal indicator in the instrument turn signal on.
Page 108: Overhead Console Map/Reading Lights
108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overhead Console Map/Reading Lights Interior Lights These lights are mounted between the sun visors on the The interior lights come on when a door is opened. overhead console. Each light is turned ON by pressing To protect the battery, the interior lights will turn off the lens.
Page 109: Windshield Wipers And Washers
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 Dome Light Position WINDSHIELD WIPERS AND WASHERS Rotate the dimmer control completely upward to the The multi-function lever operates the windshield second detent to turn on the interior lights. The interior wipers and washer when the ignition switch is in lights will remain on when the dimmer control is in this the ON position.
Page 110: Intermittent Wiper System
110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! CAUTION! Sudden loss of visibility through the windshield Turn the windshield wipers off when driving could lead to an accident. You might not see other through an automatic car wash. Damage to the vehicles or other obstacles.
Page 111: Headlights On With Wipers (Available With Auto Headlights Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 two wipe cycles after releasing the lever and then resume Rain Sensing Wipers — If Equipped the intermittent interval previously selected. This feature senses moisture on the windshield and automatically activates the wipers for the driver. This If you activate the washer while the windshield wiper is feature is especially useful for road splash or over spray turned OFF, the wipers will operate for two wipe cycles...
Page 112: Adding Washer Fluid
112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Use of Rain-X or products containing wax or silicone • Neutral Wipe Inhibit — The rain-sensing feature will may reduce rain sensor performance. not operate when the ignition is ON, and the trans- mission shift lever is in the N (Neutral) position, and •...
Page 113: Headlight Washers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 WARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. HEADLIGHT WASHERS — IF EQUIPPED The multi-function lever operates the headlight washers when the ignition switch is in the ON position and the headlights are ON.
Page 114: Adding Washer Fluid
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: The headlight washers will operate on the first washer solvent (not radiator antifreeze) and operate the spray of the windshield washer and then every fourth system for a few seconds to flush out the residual water. spray after that.
Page 115: Tilt/Telescoping Steering Column
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 TILT/TELESCOPING STEERING COLUMN To unlock the steering column, pull the control handle This feature allows you to tilt the steering column outward. To tilt the steering column, move the steering upward or downward. It also allows you to lengthen or wheel upward or downward as desired.
Page 116: Power Tilt/Telescoping Steering Column - If Equipped
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To tilt the steering column, move the lever up or down as POWER TILT/TELESCOPING STEERING COLUMN — IF EQUIPPED desired. To lengthen or shorten the steering column, pull This feature allows you to tilt the steering column the lever toward you or push the lever away from you as upward or downward.
Page 117: Adjustable Pedals - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 ADJUSTABLE PEDALS — IF EQUIPPED Press the switch rearward to move the pedals rearward The adjustable pedals system is designed to allow a (toward the driver). greater range of driver comfort for steering wheel tilt and •...
Page 118: Electronic Speed Control
118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! Do not place any article under the adjustable pedals or impede its ability to move as it may cause damage to the pedal controls. Pedal travel may become limited if movement is stopped by an obstruction in the adjustable pedal’s path.
Page 119: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 To Activate: NOTE: • Speed control will only function in third, fourth, or Push the speed control lever inward (toward the steering column) and release (“ON/OFF”). fifth gear when in the Autostick Mode (if equipped). The indicator light in the lever (and in the •...
Page 120: To Vary The Speed Setting
120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE speed. To do so, push the lever up and release (RES/ Pushing down and releasing the lever (“SET/DECEL”) ACCEL), and then remove your foot from the accelerator once will result in a 1 mph (1.6 km/h) speed decrease. pedal.
Page 121: Adaptive Cruise Control (Acc) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 ACC will allow you to keep cruise control engaged in WARNING! light to moderate traffic conditions without the constant need to reset your cruise control. ACC utilizes an infrared Speed Control can be dangerous where the system sensor designed to detect a vehicle directly ahead in your can’t maintain a constant speed.
Page 122 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! • You should switch off the ACC system: Adaptive Cruise Control (ACC) is a convenience system. It is not a substitute for active driving involvement. It is always the • When driving in fog; heavy rain; heavy snow; driver’s responsibility to be attentive of road, traffic, and sleet;...
Page 123: Adaptive Cruise Control (Acc) Operation
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 Adaptive Cruise Control (ACC) Operation Activating Adaptive Cruise Control (ACC) The speed control lever (located on the left side of the You can only activate ACC if the vehicle speed is between steering column) operates the ACC system. 25 mph and 100 mph (Canada 30 km/h and 180 km/h).
Page 124: To Activate
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To turn the system OFF, push the lever inward (toward To Activate: Push the speed control lever inward (toward the steering the steering column) again and release. At this time, the column) and release (“ON/OFF”). The ACC menu in the system will turn off and the EVIC will display “ACC EVIC displays “ACC READY.”...
Page 125: To Set A Desired Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 To Set a Desired Speed: Remove your foot from the accelerator pedal. If you do When the vehicle reaches the speed desired, push the not, the vehicle may continue to accelerate beyond the set lever down and release (“SET/DECEL”).
Page 126: To Cancel
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Cancel: To Turn Off: The system will disable ACC without erasing the The system will turn off and erase the set speed in memory if: memory if: • You softly tap the brake pedal. •...
Page 127: To Vary The Speed Setting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 To Vary the Speed Setting: Pushing the lever down and releasing once will result in While ACC is set, you can increase the set speed by lifting a 1 mph (Canada 1 km/h) decrease in set speed. Each and holding the lever up (“RES/ACCEL”).
Page 128: Setting The Following Distance In Acc
128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If there is no vehicle ahead, the vehicle will maintain the Setting the Following Distance in ACC The specified following distance for ACC can be set by set speed. If a slower moving vehicle is detected in the varying the distance setting between long, medium, and same lane, the EVIC displays the “Sensed Vehicle Indi- short.
Page 129: Adaptive Cruise Control (Acc) Menu
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 A Proximity Warning will alert the driver if ACC predicts Adaptive Cruise Control (ACC) Menu that its maximum braking level is not sufficient to The EVIC displays the current ACC system settings. The maintain the set distance.
Page 130 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ACC OFF ACC READY − When ACC is deactivated, the display will read “ACC − When ACC is activated, the display will read “ACC OFF.” READY.”...
Page 131 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 ACC SET − When ACC is set, the set speed will display. The ACC SET screen will display once again if any ACC activity occurs, which may include any of the following: 1 — Sensed Vehicle Indicator •...
Page 132: Display Warnings & Maintenance
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • System off • Proximity warning • ACC unavailable/service ACC warning The EVIC will return to the last display selected after 5 seconds of no ACC activity. Display Warnings & Maintenance ACC Unavailable Warning The ACC Unavailable Warning will display when condi- tions temporarily limit system performance.
Page 133 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 • If the sensor is damaged due to an accident, see your authorized dealer for service. • Do not attach or install any accessories near the sensor, including transparent material or aftermarket grilles. Doing so could cause an ACC system failure or malfunction.
Page 134: Precautions While Driving With Acc
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Precautions While Driving with ACC Turns and Bends In certain driving situations, ACC may have detection In turns or bends, ACC may detect a vehicle ahead too issues. In these cases, ACC may brake late or unexpect- late or too early.
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 Lane Changing Using ACC on Hills ACC will not detect a vehicle until it is completely in the When driving on hills, ACC may not detect a vehicle in lane in which you are travelling. In the illustration your lane.
Page 136: General Information
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Narrow Vehicles REAR PARK ASSIST SYSTEM — IF EQUIPPED Some narrow vehicles traveling near the outer edges of The Rear Park Assist System is a driver aid that senses for the lane or edging into the lane are not detected until they obstacles behind the vehicle.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 The system uses four sensors located in the rear bumper The warning display contains two sets of yellow and red to scan for obstacles up to 59 inches (150 cm) away from LEDs, one set to warn of obstacles behind the left rear of the rear bumper fascia.
Page 138 138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING DISPLAY DISTANCES DISPLAY LED OBSTACLE DISTANCE FROM: LED COLOR AUDIBLE SIGNAL REAR CORNERS REAR CENTER 1st LED 59 in. (150 cm) Yellow None 2nd LED 47 in. (120 cm) Yellow None 3rd LED 39 in.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 WARNING! CAUTION! • Drivers must be careful when backing up even • The Rear Park Assist System is only a parking aid when using the Rear Park Assist System. Always and it is unable to recognize every obstacle, in- check carefully behind your vehicle, look behind cluding small obstacles.
Page 140: Overhead Console
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If “Service Park Assist System” appears in the Electronic Courtesy/Reading Lights Vehicle Information Center (EVIC) after making sure the At the forward end of the console are two courtesy/ rear bumper is clean please see your authorized dealer. reading lights.
Page 141: Garage Door Opener (Homelink )
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 GARAGE DOOR OPENER (HomeLink ) — IF WARNING! EQUIPPED • A moving garage door can cause injury to people The HomeLink Universal Transceiver replaces up to three remote controls (hand held transmitters) that oper- and pets in the path of the door.
Page 142: Programming Homelink
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming HomeLink NOTE: When programming a garage door opener, it is advised to park outside the garage. It is also recom- mended that you install a new battery in the hand-held transmitter of the device being programmed. This will allow for quicker training and accurate transmission of the radio-frequency signal.
Page 143 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 1. Press and hold the two outer HomeLink buttons. 3. Simultaneously press and hold the HomeLink button Release the buttons only when the EVIC displays “Chan- (that you want to train) and the hand-held transmitter nels Cleared”...
Page 144: Canadian Programming/Gate Programming
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If your garage door opener fails to respond to (or other rolling code equipped device), repeat this the programmed HomeLink Universal Transceiver, and sequence a third time to complete the programming. your garage door opener is manufactured after 1995, it HomeLink should now activate your rolling code may have a multiple security code system (rolling code equipped device.
Page 145: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: If programming a garage door opener or gate Erasing HomeLink Buttons operator, it is advised to unplug the device during the To erase programming from the three buttons (individual cycling process to prevent possible overheating. buttons cannot be erased but can be reprogrammed - 3.
Page 146: Security
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For questions or comments, contact HomeLink at POWER SUNROOF — IF EQUIPPED www.homelink.com or 1-800-355-3515. The power sunroof switch is located between the sun visors on the overhead console. Security If you sell your vehicle, be sure to erase the frequencies by following the “Erasing HomeLink Buttons”...
Page 147: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Opening Sunroof - Express WARNING! Press the switch rearward and release, and the sunroof • Never leave children in a vehicle, with the keys in will open automatically from any position. The sunroof will open fully and then stop automatically.
Page 148: Pinch Protect Override
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pinch Protect Override Wind Buffeting If a known obstruction (ice, debris, etc.) prevents closing, Wind buffeting can be described as the perception of press the switch forward and hold for two seconds after pressure on the ears or a helicopter type sound in the the reversal occurs.
Page 149: Sunroof Fully Closed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 For vehicles equipped with the EVIC, the power sunroof ELECTRICAL POWER OUTLETS switch will remain active for up to 60 minutes after the There are two 12-volt electrical outlets on this vehicle. ignition switch is turned off. Opening either front door Both of the outlets are protected by a fuse.
Page 150 150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If desired, the power outlet next to the ash The center console outlet is powered directly from the receiver tray (if equipped) can be converted by your battery (power available at all times). Items plugged into authorized dealer to provide power with the ignition this outlet may discharge the battery and/or prevent switch in the LOCK position.
Page 151: Electrical Outlet Use With Engine Off
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 Electrical Outlet Use With Engine Off CUP HOLDERS Front Seat Cup Holders — Standard The cup holders are located in the forward edge of the CAUTION! center console. • Many accessories that can be plugged in draw power from the vehicle’s battery, even when not in use (i.e.
Page 152: Front Seat Cup Holders - 300 Touring And 300C Models
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Seat Cup Holders — 300 Touring and 300C Rear Seat Cup Holders Models The rear seat cup holders are located in the center armrest The cup holders are located in the forward edge of the between the rear seats.
Page 153: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 STORAGE In addition to the internal storage, the console contains two shift bezel cubby bins with rubber mats for holding Console Features small items. For vehicles not equipped with navigation The center console contains a large storage bin. The radio, the console also contains an extra storage bin storage bin contains a four-slot coin holder (designed to located below the climate control, which holds up to four...
Page 154 154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! • Be certain that the seatback is securely locked into • The weight and position of cargo and passengers position. If the seatback in not securely locked can change the vehicle center of gravity and into position, the seat will not provide the proper vehicle handling.
Page 155: Load Leveling System - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 LOAD LEVELING SYSTEM — IF EQUIPPED If the leveled vehicle is not moved for approximately 15 The automatic load leveling system will provide a level- hours, the leveling system will bleed itself down. The riding vehicle under most passenger and cargo loading vehicle must be driven to reset the system.
Page 157: Understanding Your Instrument Panel
UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS ▫ Personal Settings (Customer Programmable Instrument Panel And Controls ... . 160 Features) ......182 Base Instrument Cluster .
Page 158 158 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Operating Instructions - Radio Mode ..188 ▫ Changing Tape Direction ....199 ▫...
Page 159 UNDERSTANDING YOUR INSTRUMENT PANEL 159 Video Entertainment System (Sales Code XRV) — Remote Sound System Controls — If Equipped ......210 If Equipped .
Page 160: Instrument Panel And Controls
160 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL AND CONTROLS 1 — Air Outlet 7 — Radio 13 — Ignition Switch 2 — Instrument Cluster 8 — Climate Control 14 — Hood Release 3 — Hazard Switch 9 — Heated Seat Switch* 15 —...
Page 161: Base Instrument Cluster
UNDERSTANDING YOUR INSTRUMENT PANEL 161 BASE INSTRUMENT CLUSTER...
Page 162: Premium Instrument Cluster
162 UNDERSTANDING YOUR INSTRUMENT PANEL PREMIUM INSTRUMENT CLUSTER...
Page 163: Instrument Cluster Descriptions
UNDERSTANDING YOUR INSTRUMENT PANEL 163 INSTRUMENT CLUSTER DESCRIPTIONS NOTE: Check for a defective outside light bulb if either indicator flashes at a rapid rate. (See page 107 for more 1. Electronic Speed Control/Adaptive Cruise Control information.) (ACC) Indicator Light — If Equipped This light will turn on when the electronic 5.
Page 164 164 UNDERSTANDING YOUR INSTRUMENT PANEL Tighten the fuel filler cap properly and press the odom- 9. Anti-Lock Brake Light — If Equipped eter reset button to turn off the message. If the problem This light monitors the Anti-Lock Brake System. continues, the message will appear the next time the The light will turn on when the ignition switch vehicle is started.
Page 165 UNDERSTANDING YOUR INSTRUMENT PANEL 165 running. The system will turn this light on continu- failure. Failure of either half of the dual brake system is ously while the engine running if it detects a malfunc- indicated by the Brake Warning Light, which will turn on tion in either the ESP or the BAS or both.
Page 166 166 UNDERSTANDING YOUR INSTRUMENT PANEL turn on in the event of an EBD failure. Immediate repair 13. Electronic Stability Program (ESP)/Traction of the ABS system is required in the event of an EBD Control System (TCS) Indicator Light failure. If this indicator light flashes during accelera- tion, ease up on the accelerator and apply as The operation of the Brake Warning Light can be checked little throttle as possible.
Page 167 UNDERSTANDING YOUR INSTRUMENT PANEL 167 15. Trip Odometer Button CAUTION! Trip Odometer Button — Base Cluster Driving with a hot engine cooling system could The word TRIP will appear when this button is pressed. damage your vehicle. If temperature gauge reads (H), Push in and hold the button for two seconds when the pull over and stop the vehicle.
Page 168 168 UNDERSTANDING YOUR INSTRUMENT PANEL 17. Transmission Range Indicator 21. Electronic Throttle Control (ETC) Light This display indicator shows the automatic transmission This light will turn on briefly as a bulb check gear selection. when the ignition switch is turned ON. This light will also turn on while the engine is 18.
Page 169 UNDERSTANDING YOUR INSTRUMENT PANEL 169 22. Tire Pressure Monitoring Telltale Light — If Please note that the TPMS is not a substitute for proper Equipped tire maintenance, and it is the driver’s responsibility to Each tire, including the spare (if provided), maintain correct tire pressure, even if under-inflation has should be checked monthly when cold and not reached the level to trigger illumination of the TPMS...
Page 170 170 UNDERSTANDING YOUR INSTRUMENT PANEL 24. Malfunction Indicator Light CAUTION! This light is part of an onboard diagnostic system called OBD. The OBD system monitors The TPMS has been optimized for the original engine and automatic transmission control sys- equipment tires and wheels. TPMS pressures and tems.
Page 171: Electronic Vehicle Information Center (Evic) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 171 25. Oil Pressure Warning Light ELECTRONIC VEHICLE INFORMATION CENTER This light shows low engine oil pressure. The (EVIC) — IF EQUIPPED light should turn on momentarily when the engine is started. If the light turns on while driving, stop the vehicle, and shut off the engine as soon as possible.
Page 172 172 UNDERSTANDING YOUR INSTRUMENT PANEL • Vehicle information warning message displays Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button • Tire Pressure Monitor System (if equipped) also advances the radio to the next preset • Personal Settings (customer programmable features) station, changes the side of the tape being FUNC- played (if so equipped), or changes the current...
Page 173: Electronic Vehicle Information Center (Evic) Displays
UNDERSTANDING YOUR INSTRUMENT PANEL 173 • Memory #1/#2 Profile Recall If Compass/Temp/Audio is already displayed when the AUDIO MODE button is pressed, then the radio mode • Memory System Disabled – Vehicle Not In Park (with will change from AM to FM, to Tape, to CD, or to Satellite a single chime) (SAT) accordingly.
Page 174 174 UNDERSTANDING YOUR INSTRUMENT PANEL • ACC Ready — When the Adaptive Cruise Control will flash and a chime will sound while ACC continues (ACC) system is activated. Refer to “Adaptive Cruise to apply its maximum braking capacity. When this Control (ACC)”...
Page 175: Trip Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 175 • Adjustable Pedals Disabled – Vehicle In Reverse (with • Right Front Low Pressure (with a single chime). Refer a single chime) — only available on vehicles equipped to information on “Tire Pressure” and “Tire Pressure with memory seats.
Page 176 176 UNDERSTANDING YOUR INSTRUMENT PANEL • Trip A Vehicles with the 5.7L Multi-Displacement System (MDS) may be equipped with the FUEL SAVER MODE in the • Trip B Trip Functions of the EVIC. The FUEL SAVER MODE • Elapsed Time message will display above the average fuel economy in the EVIC display.
Page 177 UNDERSTANDING YOUR INSTRUMENT PANEL 177 This feature allows you to monitor when the MDS and average fuel economy, according to the current fuel switches off the fuel on four of the eight cylinders and it tank level. DTE cannot be reset through the FUNCTION can be used to modify driving habits in order to increase SELECT button.
Page 178: Compass Display
178 UNDERSTANDING YOUR INSTRUMENT PANEL • Elapsed Time Compass Display Shows the total elapsed time of travel since the last reset The compass readings indicate the direction when the ignition switch is in the ACC position. Elapsed the vehicle is facing. Press and release the time will increment when the ignition switch is in the ON compass button to display one of eight com- or START position.
Page 179 UNDERSTANDING YOUR INSTRUMENT PANEL 179 2. Press and hold the compass button for approximately 2 seconds. 3. Press the SCROLL button until “Calibrate Compass” displays in the EVIC. 4. Press and release the FUNCTION SELECT button to start the calibration. The message “CAL” will display in the EVIC.
Page 180: Telephone - If Equipped
180 UNDERSTANDING YOUR INSTRUMENT PANEL • Call status: Incoming call, connecting, connected, air 1. Turn the ignition switch ON. time in minutes and seconds, call ended, call failed, 2. Press and hold the compass button for approximately roaming, and no phone connection. 2 seconds.
Page 181 UNDERSTANDING YOUR INSTRUMENT PANEL 181 The EVIC displays this symbol to indicate that The EVIC displays this symbol to indicate the the UConnect™ phone is currently in analog battery strength of the UConnect™ phone. mode. Analog Battery Strength The EVIC displays this symbol to indicate that The EVIC displays this symbol to indicate that the UConnect™...
Page 182: Navigation - If Equipped
182 UNDERSTANDING YOUR INSTRUMENT PANEL Navigation — If Equipped Personal Settings (Customer Programmable Features) Navigation Display Control Personal Settings allows the driver to set and recall Press and release the MENU button until Navigation features when the transmission is in PARK. displays in the EVIC.
Page 183 UNDERSTANDING YOUR INSTRUMENT PANEL 183 “Lock Doors Automatically at 15 mph (24 Km/h)” “Recall Memory with Remote Key Unlock” — If When ON is selected, all doors will lock automatically Equipped when the vehicle reaches a speed of 15 mph (24 km/h). When ON is selected, you can use your Remote Keyless To make your selection, press and release the FUNC- Entry Transmitter to recall one of two pre-programmed...
Page 184 184 UNDERSTANDING YOUR INSTRUMENT PANEL “Rain Sensing Intermittent Wipers” — If Equipped “Flash Lights with Remote Key Lock” When ON is selected, the system will automatically When ON is selected, the front and rear turn signals will activate the windshield wipers if it senses moisture on flash when the doors are locked or unlocked with the the windshield.
Page 185 UNDERSTANDING YOUR INSTRUMENT PANEL 185 “Delay Turning Headlights Off” “Delay Power Off to Accessories Until Exit” When this feature is selected, the driver can choose to When this feature is selected, the power window have the headlights remain on for 0, 30, 60, or 90 seconds switches, radio, hands–free system (if equipped), DVD when exiting the vehicle.
Page 186: Setting The Analog Clock
186 UNDERSTANDING YOUR INSTRUMENT PANEL “Turn by Turn Navigation” — If Equipped SETTING THE ANALOG CLOCK When ON is selected, the Turn-by-Turn directions will To set the analog clock at the top center of the instrument appear in the display as the vehicle approaches a desig- panel, press and hold the button until the setting is nated turn within a programmed route.
Page 187: Radio General Information
UNDERSTANDING YOUR INSTRUMENT PANEL 187 RADIO GENERAL INFORMATION and thus remain a part of the AM reception. They interfere very little with the frequency variations that Radio Broadcast Signals carry the FM signal. Your new radio will provide excellent reception under most operating conditions.
Page 188: Sales Code Ref - Am/Fm/Cd (Single Disc) Radio With Optional Satellite Radio And Hands Free Phone Capability
188 UNDERSTANDING YOUR INSTRUMENT PANEL changer (if equipped) will remain active for up to 60 minutes after the ignition switch is turned off. Opening either front door will cancel this feature. The time is programmable. For details, refer to “Delay Power Off to Accessories Until Exit,”...
Page 189 UNDERSTANDING YOUR INSTRUMENT PANEL 189 Electronic Volume Control MUTE Button (Radio Mode) The electronic volume control turns continuously (360 Press the MUTE button to cancel the sound from the degrees) in either direction without stopping. Turning the speakers. MUTE will display. Press the MUTE button a volume control to the right increases the volume and to second time and the sound from the speakers will return.
Page 190 190 UNDERSTANDING YOUR INSTRUMENT PANEL Time Button TUNE Control (Radio Mode) Press the time button and the time of day will display for Turn the right side rotary control clockwise to increase or 5 seconds. counter-clockwise to decrease the frequency. Clock Setting Procedure AM/FM Button (Radio Mode) Press the button to select AM or FM Modes.
Page 191: Operation Instructions - Cd Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 191 Press the rotary TUNE control a fifth time and FADE will push-button memory. The stations stored in SET 2 display. Turn the TUNE control to the left or right to memory can be selected by pressing the push-button adjust the sound level between the front and rear speak- twice.
Page 192 192 UNDERSTANDING YOUR INSTRUMENT PANEL If the volume control is ON, the unit will switch to CD Rotating the volume control or turning OFF the ignition mode and begin to play. The display will show the track will also return the sound from the speakers. number and play time in minutes and seconds.
Page 193: Operation Instructions - Auxiliary Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 193 RND/SET Button (Random Play Button) (CD The auxiliary mode becomes active when an electrical Mode) device is plugged into the AUX jack using a standard 3.5 Press this button while the CD is playing to activate mm stereo audio cable and the user presses and releases Random Play.
Page 194: Operating Instructions - Hands Free Phone - If Equipped
194 UNDERSTANDING YOUR INSTRUMENT PANEL EJECT Button (Auxiliary Mode) RND/SET Button (Auxiliary Mode) No function. No function. Mode Button (Auxiliary Mode) Press the mode button repeatedly to select between the CD player and Satellite Radio (if equipped). PSCAN Button (Auxiliary Mode) No function.
Page 195: Sales Code Rak - Am/Fm/Cassette/Cd
UNDERSTANDING YOUR INSTRUMENT PANEL 195 SALES CODE RAK – AM/FM/CASSETTE/CD Operating Instructions - Radio Mode (6-DISC) RADIO WITH OPTIONAL SATELLITE NOTE: The ignition switch must be in the ON or ACC RADIO, HANDS FREE PHONE, VIDEO, MP3, and position to operate the radio. WMA CAPABILITIES Power Switch/Volume Control (Rotary) NOTE: The radio sales code is located on the lower...
Page 196 196 UNDERSTANDING YOUR INSTRUMENT PANEL Press the right side of the button to seek up and the left 3. After the hours are adjusted, press the right side side to seek down. The radio will remained tuned to the Tune/Audio control to set the minutes. The minutes will new station until you make another selection.
Page 197 UNDERSTANDING YOUR INSTRUMENT PANEL 197 AM/FM Button (Radio Mode) Press the rotary TUNE control again to exit setting tone, Press the button to select AM or FM Modes. balance, and fade. Setting the Tone, Balance, and Fade RND/PTY Button (Radio Mode) Press the rotary TUNE control and BASS will display.
Page 198: Operating Instructions - Tape Player
198 UNDERSTANDING YOUR INSTRUMENT PANEL station with the same selected PTY name. The PTY Soft Rock Soft_Rock function only operates when in the FM mode. Top 40 Top_40 If a preset button is activated while in the PTY (Program Country Country Type) mode, the PTY mode will be exited and the radio Oldies...
Page 199: Seek Button
UNDERSTANDING YOUR INSTRUMENT PANEL 199 Seek Button Tape Eject Press the SEEK button up for the next selection on the Press this button and the cassette will disen- tape and down to return to the beginning of the current gage and eject from the radio. selection.
Page 200: Noise Reduction
200 UNDERSTANDING YOUR INSTRUMENT PANEL Noise Reduction Inserting Compact Disc(s) The Dolby Noise Reduction System* is on whenever the tape player is on, but may be switched off. CAUTION! To turn off the Dolby Noise reduction System: Press This CD player will accept 4 3/4 inch (12 cm) discs Preset 1 after you insert the tape.
Page 201: Load/Eject Button (Cd Mode For Cd Audio Play)
UNDERSTANDING YOUR INSTRUMENT PANEL 201 SCAN Button (CD MODE for CD Audio Play) Radio display will show EJECTING DISC when the disc Press the Scan button to scan through each track on the is being ejected and prompt the user to remove the disc. CD currently playing.
Page 202: Notes On Playing Mp3 Files
202 UNDERSTANDING YOUR INSTRUMENT PANEL Press and hold the FF button to fast forward through the RW/FF (CD MODE for CD Audio Play) Press and hold FF (Fast Forward) and the CD player will tracks. Release the FF button to stop the fast forward begin to fast forward until FF is released or RW or feature.
Page 203 UNDERSTANDING YOUR INSTRUMENT PANEL 203 files properly and may be unable to play the file nor- Supported MP3 File Formats mally. UDF and Apple HFS formats are not supported. The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 The radio uses the following limits for file systems: extension may cause playback problems.
Page 204: Operation Instructions
204 UNDERSTANDING YOUR INSTRUMENT PANEL ID3 Tag information for artist, song title, and album title To increase the speed of disc loading, it is recommended are supported for version 1 ID3 tags. ID3 version 2 is not to use CD-R media and single-session discs. To create a supported by the radios.
Page 205 UNDERSTANDING YOUR INSTRUMENT PANEL 205 The radio display will show LOADING DISC when the INFO Button (CD Mode for MP3 Play) disc is loading. Press and INFO button while playing MP3 or WMA disc. The radio scrolls through the following TAG information: LOAD/EJT - Eject Song Title, Artist, File Name, and Folder Name (if avail- Press the LOAD/EJT button and the push-...
Page 206: Sales Code Rec - Am/Fm/Cd (6-Disc) Radio With Navigation System
206 UNDERSTANDING YOUR INSTRUMENT PANEL RND/PTY Button (CD Mode for MP3 Play) Operating Instructions - Video Entertainment Pressing this button plays files randomly. System (VES) (If Equipped) Refer to separate “Video Entertainment System (VES) SET/DIR Button (CD Mode for MP3 Play) Guide.”...
Page 207: Operating Instructions - Satellite Radio (If Equipped)
UNDERSTANDING YOUR INSTRUMENT PANEL 207 screen to provide maps, turn identification, selection 1. At the Main Menu screen, highlight “Clock Setup” menus and instructions for selecting a variety of destina- and press ENTER OR press and hold for 3 seconds the tions and routes, AM/FM stereo radio and six-disc CD TIME button on the unit’s faceplate.
Page 208 208 UNDERSTANDING YOUR INSTRUMENT PANEL 4. To turn daylight savings on or off, select “Daylight Savings” and press ENTER. Select “On” or “Off” and press ENTER. 5. Select DONE to exit from the clock setting mode. Press ENTER to save your changes. If you press CANCEL or NAV then your changes will not be saved.
Page 209: Audio Clock Display
UNDERSTANDING YOUR INSTRUMENT PANEL 209 4. To increase the clock by minutes, make sure “MIN +” Audio Clock Display is highlighted and press ENTER. Press ENTER again to Select this option to change the size of the clock on the increase the clock by another minute.
Page 210: Video Entertainment System (Sales Code Xrv) - If Equipped
210 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To switch the clock to the small clock, quickly press VIDEO ENTERTAINMENT SYSTEM (SALES CODE TIME again. XRV) — IF EQUIPPED The optional VES™ (Video Entertainment System) con- sists of a DVD player and LCD (liquid crystal display) screen, a battery-powered remote control, and two head- sets.
Page 211 UNDERSTANDING YOUR INSTRUMENT PANEL 211 Raising The DVD Screen Remote Control Location...
Page 212: Satellite Radio - If Equipped
212 UNDERSTANDING YOUR INSTRUMENT PANEL SATELLITE RADIO — IF EQUIPPED Electronic Serial Number/Sirius Identification Satellite radio uses direct satellite to receiver broadcast- Number (ESN/SID) ing technology to provide clear digital sound, coast to The Electronic Serial Number/Sirius Identification Num- coast. The subscription service provider is Sirius™ Satel- ber is needed to activate your Sirius Satellite Radio lite Radio.
Page 213: Selecting Satellite Mode In Ref, Raq, And Rak
UNDERSTANDING YOUR INSTRUMENT PANEL 213 ESN/SID Access With RAQ and RAK Radios Selecting Satellite Mode — RAQ and RAK Radio With the ignition switch in the ACCESSORY position and Press the MODE button repeatedly until the word SAT the radio OFF, press the CD Eject and TIME buttons appears in the display.
Page 214: Storing And Selecting Pre-Set Channels
214 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Channels that may contain objectionable con- NOTE: Pressing the SEEK or SCAN button, while tent can be blocked. Contact Sirius Customer Care at performing a music type scan, will change the channel by 888-539-7474 to discuss options for channel blocking or one and stop the search.
Page 215: Reception Quality
UNDERSTANDING YOUR INSTRUMENT PANEL 215 Reception Quality REMOTE SOUND SYSTEM CONTROLS — IF Satellite reception may be interrupted due to one of the EQUIPPED following reasons. The remote sound system controls are located on the surface of the steering wheel at the 3 and 9 o’clock •...
Page 216: Radio Operation
216 UNDERSTANDING YOUR INSTRUMENT PANEL The VOLUME button controls the sound level When the EVIC is in the Compass/Temp/ of the sound system. Press the top of the Audio screen, press the FUNCTION SELECT VOLUME button to increase the sound level. button to advance the radio to the next preset Press the bottom of the VOLUME button to station, to change the side of the tape being...
Page 217: Tape Player Operation
UNDERSTANDING YOUR INSTRUMENT PANEL 217 Tape Player Operation Press either the top or bottom of the SCROLL button Press the top of the SCROLL button once to listen to the twice to listen to the second track on the CD, three times next track on the cassette.
Page 218: Cd/Dvd Disc Maintenance
218 UNDERSTANDING YOUR INSTRUMENT PANEL 5. A loose tape should be corrected before use. To rewind CD/DVD DISC MAINTENANCE a loose tape, insert the eraser end of a pencil into the tape To keep the CD/DVD discs in good condition, take the drive gear and twist the pencil in the required directions.
Page 219: Radio Operation And Cellular Phones
UNDERSTANDING YOUR INSTRUMENT PANEL 219 RADIO OPERATION AND CELLULAR PHONES Manual Air Conditioning and Heating System Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular phone antenna.
Page 220 220 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To improve fuel economy, leave in defrost only Temperature Control The rotary knob in the center controls when necessary. air temperature. Rotate the control to • Defrost/Floor the left for cooler air temperature and Air flows through the front and rear floor to the right for warmer air tempera- outlets and the outlets at the base of the...
Page 221: Automatic Temperature Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 221 • Panel a second time to turn off the air conditioning. An LED in Air flows through the outlets located in the the button will illuminate when compressor operation is instrument panel. Air flows through the regis- selected.
Page 222 222 UNDERSTANDING YOUR INSTRUMENT PANEL the controls on the climate control, from a dual sun- would like the system to maintain by rotating the driver sensor located in the top of the instrument panel, from an or passenger Temperature Control knob. Once the com- infrared sensor located in the face of the climate control, fort level is selected, the system will maintain that level and from various sensors located throughout the vehicle.
Page 223 UNDERSTANDING YOUR INSTRUMENT PANEL 223 The system will automatically control recir- Some temp/humidity conditions will cause captured culation. However, pressing the Recircula- interior air to condense on windows and hamper tion Control button will temporarily put the visibility. For this reason, the system will not allow system in recirculation mode (ten minutes).
Page 224 224 UNDERSTANDING YOUR INSTRUMENT PANEL...
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL 225 • Bi-Level The operator can override the AUTO mode setting to change airflow distribution by rotating the Mode Control Air flows through the outlets located in the knob (on the right) to one of the following positions. instrument panel and through the outlets lo- cated on the floor.
Page 226: Operating Tips
226 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: To control the air conditioning manually, the Operating Tips mode selector must be moved out of the AUTO position. NOTE: Refer to the chart at the end of this section for • Recirculation Control suggested control settings for various weather condi- This button can be used to block out smoke, tions.
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 227 system lubrication to minimize the possibility of com- Outside Air Intake pressor damage when the system is started again. Make sure the air intake, located directly in front of the windshield, is free of obstructions such as leaves. Leaves Window Fogging collected in the air intake may reduce airflow, and if they Interior fogging on the windshield can be quickly re-...
Page 228 228 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions for Various Weather Conditions...
Page 229: Rear Window Features
UNDERSTANDING YOUR INSTRUMENT PANEL 229 REAR WINDOW FEATURES CAUTION! Electric Rear Window Defroster To avoid damaging the electrical conductors of the The electric Rear Window Defroster Control is rear window defroster, do not use scrapers, sharp located on the climate control. Press this button to instruments, or abrasive window cleaners on the turn on the rear window defroster and the heated side interior surface of the window.
Page 231 STARTING AND OPERATING CONTENTS ▫ 4 Speed Automatic Transmission ..240 Starting Procedures ....234 ▫...
Page 232 232 STARTING AND OPERATING ▫ Tire Inflation Pressures ....272 Power Steering ......255 ▫...
Page 233: Starting And Operating
STARTING AND OPERATING 233 ▫ Premium System — If Equipped ..285 ▫ Gross Vehicle Weight Rating (GVWR) ..296 ▫ General Information ....288 ▫...
Page 234: Starting Procedures
234 STARTING AND OPERATING STARTING PROCEDURES WARNING! Before starting your vehicle, adjust your seat, adjust the • Never leave children alone in a vehicle. Leaving inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat children in a vehicle unattended is dangerous for belts.
Page 235: Automatic Transmission
STARTING AND OPERATING 235 Automatic Transmission If Engine Fails To Start The gear selector must be in the NEUTRAL or PARK If the engine fails to start after you have followed the position before you can start the engine. Apply the brakes “NORMAL STARTING”...
Page 236: After Starting
236 STARTING AND OPERATING If the engine is flooded, it may start to run, but not have WARNING! enough power to continue running when the key is • Never pour fuel or other flammable liquid into released. If this occurs, continue cranking up to 15 seconds with the accelerator pedal pushed all the way to the throttle body air inlet opening in an attempt to the floor.
Page 237: Engine Block Heater - If Equipped
STARTING AND OPERATING 237 ENGINE BLOCK HEATER — IF EQUIPPED AUTOMATIC TRANSMISSION The engine block heater warms engine coolant and permits quicker starts in cold weather. Connect the cord CAUTION! to a standard 110-115 volt AC electrical outlet with a grounded, three-wire extension cord.
Page 238: Automatic Transmission - General Information
238 STARTING AND OPERATING The gear shifting process is continuously adapted, de- WARNING! pendent on the driving style, the driving situation and the road characteristics. It is dangerous to shift the selector lever out of “P” or “N” if the engine speed is higher than idle speed. If NOTE: your foot is not firmly on the brake pedal, the •...
Page 239 STARTING AND OPERATING 239 The selector lever is automatically locked while in the P WARNING! (Park) position. To move the selector lever out of the P (Park) position, the brake pedal must be firmly depressed Unintended movement of a vehicle could injure before the shift lock will release.
Page 240: Brake/Transmission Shift Interlock System
240 STARTING AND OPERATING For electrical system malfunctions, there is an override Brake/Transmission Shift Interlock System This vehicle is equipped with a brake transmission shift for the interlock system. In order to override this system interlock system (BTSI) that holds the selector lever in the the key must be in the ignition with the switch in the P (Park) position when the ignition switch is in the LOCK ACC or ON positions.
Page 241 STARTING AND OPERATING 241 When parking on a flat surface, place the gear selector in the P (Park) position first, and then apply the parking brake. When parking on a hill, it is important to set the parking brake before placing the gear selector in P (Park), other- wise the load on the transmission locking mechanism may make it difficult to move the selector out of park.
Page 242 242 STARTING AND OPERATING The following indicators should be used to ensure that CAUTION! you have engaged the selector lever into the P (Park) position: Coasting the vehicle, or driving for any other reason with selector lever in NEUTRAL can result in trans- •...
Page 243 STARTING AND OPERATING 243 vehicle under heavy loading conditions (in hilly ter- NOTE: Using the “3” range while operating the vehicle rain, traveling into strong head winds, or while tow- under heavy operating conditions will improve perfor- ing heavy trailers. mance and extend transmission life by reducing exces- sive shifting and heat build up.
Page 244 244 STARTING AND OPERATING at calibrated speeds. This may result in a slightly differ- transmission. The torque converter will refill within 5 ent feeling or response during normal operation in high seconds of shifting from P (Park) into any other gear gear.
Page 245: Speed Automatic Transmission
STARTING AND OPERATING 245 If the transmission cannot be reset, dealer service is Gear Ranges required. P (Park) 5 Speed Automatic Transmission P (Park) supplements the parking brake by locking the Shifting from D (Drive) to P (Park) or R (Reverse) (or transmission.
Page 246 246 STARTING AND OPERATING R (Reverse) WARNING! Shift into R (Reverse) gear only when the vehicle is completely stopped. Never use Park position on an automatic transmis- sion as a substitute for the parking brake. Always N (Neutral) apply parking brake fully when parked to guard No power is transmitted from the engine to the drive against vehicle movement and possible injury or axle.
Page 247 STARTING AND OPERATING 247 AutoStick Gear selection WARNING! The AutoStick feature can be selected by pressing the selector lever to the right or the left with the lever in the Do not coast in N (Neutral) and never turn off the D (Drive) position.
Page 248 248 STARTING AND OPERATING will remain in the current gear until the vehicle is WARNING! brought to a stop. After the vehicle has stopped, P (Park), R (Reverse), and N (Neutral) will continue to operate. On slippery road surfaces, never downshift in order Second gear will operate in the D (Drive) shifter position.
Page 249: Autostick - If Equipped
STARTING AND OPERATING 249 possible convenience. Your dealer has diagnostic equip- AUTOSTICK — IF EQUIPPED ment to determine if the problem could recur. Autostick is a driver-interactive transmission that offers manual gear shifting to provide you with more control of Have the transmission checked at your authorized dealer the vehicle.
Page 250: All Wheel Drive - If Equipped
250 STARTING AND OPERATING move the selector lever to the Right or Left (D+/D-) while DRIVING ON SLIPPERY SURFACES in the D (Drive) position. The transmission will remain in Acceleration the current gear until an upshift or downshift is chosen. Rapid acceleration on snow covered, wet, or other slip- pery surfaces may cause the rear wheels to pull errati- ALL WHEEL DRIVE —...
Page 251: Traction
STARTING AND OPERATING 251 Traction PARKING BRAKE When driving on wet or slushy roads, it is possible for a The parking brake should always be applied when the wedge of water to build up between the tire and road driver is not in the vehicle. surface.
Page 252 252 STARTING AND OPERATING The foot operated parking brake is positioned below the NOTE: This light only shows that the parking brake is lower left corner of the instrument panel. To apply the applied. It does not show the degree of brake application. parking brake, push the parking brake pedal down and then remove your foot from the pedal.
Page 253: Brake System
STARTING AND OPERATING 253 BRAKE SYSTEM The electronic brake force distribution (EBD) prevents the Your vehicle is equipped with dual hydraulic rear wheels from over-braking and provides greater brake systems. If either of the two hydraulic control of available braking forces applied to the rear systems loses normal capability, the remaining axle.
Page 254 254 STARTING AND OPERATING You also may experience the following when the brake WARNING! system goes into Anti-lock: • The Anti-Lock Brake System contains sophisticated elec- • The ABS motor running (it may continue to run for a tronic equipment that may be susceptible to interference short time after the stop), caused by improperly installed or high output radio transmitting equipment.
Page 255: Power Steering
STARTING AND OPERATING 255 All vehicle wheels and tires must be the same size and Brake Force Distribution (EBD) systems are not function- type and tires must be properly inflated to produce ing. Immediate repair to the ABS system is required. accurate signals for the computer.
Page 256: Multi Displacement System (Mds) - 5.7L Engine Only
256 STARTING AND OPERATING MULTI DISPLACEMENT SYSTEM (MDS) - 5.7L WARNING! Engine Only This feature offers improved fuel economy by shutting Continued operation with reduced power steering off four of the engine’s eight cylinders during light load assist could pose a safety risk to yourself and others. and cruise conditions.
Page 257: Traction Control System (Tcs) - If Equipped
STARTING AND OPERATING 257 TRACTION CONTROL SYSTEM (TCS) — IF acceleration, ease up on the accelerator and apply as little EQUIPPED throttle as possible. Be sure to adapt your speed and driving to the prevailing road conditions. WARNING! The TCS OFF button is located in the center of the instrument panel.
Page 258: Brake Assist System (Bas) - If Equipped
258 STARTING AND OPERATING NOTE: To improve the vehicle’s traction when driving BRAKE ASSIST SYSTEM (BAS) — IF EQUIPPED with snow chains, or starting off in deep snow, sand, or gravel, switch off the TCS by pressing the TCS OFF WARNING! button.
Page 259: Electronic Stability Program (Esp)
STARTING AND OPERATING 259 The Brake Assist System (BAS) is standard on vehicles ELECTRONIC STABILITY PROGRAM (ESP) — IF equipped with Electronic Stability Program (ESP). The EQUIPPED BAS is designed to optimize the vehicle’s braking capa- bility during emergency braking maneuvers. The system WARNING! applies optimum pressure to the brakes in emergency braking conditions than might otherwise be afforded...
Page 260 260 STARTING AND OPERATING power may also be reduced to assist in counteracting the The ESP OFF button is located in the center of the condition of oversteer or understeer and help the vehicle instrument panel. To turn OFF the ESP, momentarily maintain the desired path.
Page 261: Synchronizing Esp
STARTING AND OPERATING 261 When ESP is switched off, the engine torque reduction CAUTION! feature is cancelled. Therefore, the enhanced vehicle stability offered by ESP is unavailable. However, a fea- If the vehicle is towed with the front axle raised, the ture of the system remains active.
Page 262: Esp/Bas Malfunction Indicator And Esp/Tcs Indicator Lights
262 STARTING AND OPERATING ESP/BAS Malfunction Indicator and ESP/TCS TIRE SAFETY INFORMATION Indicator Lights Tire Markings The malfunction indicator light for the ESP is combined with the BAS indicator. The yellow ESP/BAS malfunction indicator light and the yellow ESP/TCS indicator light in the instru- ment cluster both come on when the ignition switch is turned to the “ON”...
Page 263 STARTING AND OPERATING 263 • Temporary Spare tires are high-pressure compact the section width. The letter P is absent from this tire size designation. Example: 215/65R15 96H spares designed for temporary emergency use only. Tires designed to this standard have the letter “T” •...
Page 264 264 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standards ..blank..= Passenger car tire based on European design standards LT = Light Truck tire based on U.S. design standards T = Temporary Spare tire 31 = Overall Diameter in Inches (in) 215 = Section Width in Millimeters (mm)
Page 265 STARTING AND OPERATING 265 EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry. H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Page 266: Tire Identification Number (Tin)
266 STARTING AND OPERATING Look for the TIN on the outboard side of black sidewall Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; tires as mounted on the vehicle. If the TIN is not found on however, the date code may only be on one side.
Page 267: Tire Loading And Tire Pressure
STARTING AND OPERATING 267 Tire Loading and Tire Pressure Tire and Loading Information Placard Tire Placard Location NOTE: The proper cold tire inflation pressure is listed on either the face of the driver’s door or the driver’s side “B” pillar. Tire and Loading Information This placard tells you important information about the:...
Page 268 268 STARTING AND OPERATING Loading Steps for Determining Correct Load Limit The vehicle maximum load on the tire must not exceed 1. Locate the statement “The combined weight of occu- the load carrying capacity of the tire on your vehicle. You pants and cargo should never exceed XXX pounds”...
Page 269 STARTING AND OPERATING 269 manual to determine how this reduces the available illustration purposes only and may not be accurate for cargo and luggage load capacity of your vehicle. the seating and load carry capacity of your vehicle. NOTE: The following table shows examples on how to NOTE: For the following example, the combined calculate total load, cargo/luggage, and towing capaci-...
Page 270 270 STARTING AND OPERATING...
Page 271: Tires - General Information
STARTING AND OPERATING 271 1. Safety— WARNING! Overloading of your tires is dangerous. Overloading WARNING! can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never cause accidents.
Page 272: Tire Inflation Pressures
272 STARTING AND OPERATING 2. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread. These abnormal wear patterns will reduce tread life resulting in a need for earlier tire replacement. Under inflation, also increases tire rolling resistance and results in higher fuel consump- tion.
Page 273 STARTING AND OPERATING 273 Example: If garage temperature = 68° F (20° C) and the CAUTION! outside temperature = 32° F (0° C) then the cold tire inflation pressure should be increased by 3 psi (21 kPa), After inspecting or adjusting the tire pressure, al- which equals 1 psi (7 kPa) for every 12°...
Page 274: Radial-Ply Tires
274 STARTING AND OPERATING Cuts and punctures in radial tires are repairable only in WARNING! the tread area because of sidewall flexing. Consult your authorized tire dealer for radial tire repairs. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Compact Spare Tire —...
Page 275: Limited Use Spare - If Equipped
STARTING AND OPERATING 275 Do not install a wheel cover or attempt to mount a tire affects vehicle handling. Since it is not the same tire, conventional tire on the compact spare wheel, since the replace (or repair) the original tire and reinstall on the wheel is designed specifically for the compact spare.
Page 276: Tread Wear Indicators
276 STARTING AND OPERATING WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) for more than 30 seconds continuously when you are stuck, and don’t let anyone near a spinning wheel, no matter what the speed.
Page 277: Life Of Tire
STARTING AND OPERATING 277 Life of Tire Replacement Tires The service life of a tire is dependent upon varying The tires on your new vehicle provide a balance of many factors including but not limited to: characteristics. They should be inspected regularly for wear and correct cold tire inflation pressure.
Page 278: Alignment And Balance
278 STARTING AND OPERATING WARNING! CAUTION! • Do not use a tire, wheel size or rating other than Replacing original tires with tires of a different size that specified for your vehicle. Some combina- may result in false speedometer and odometer read- tions of unapproved tires and wheels may change ings.
Page 279: Self-Sealing Tires - If Equipped
STARTING AND OPERATING 279 SELF–SEALING TIRES — IF EQUIPPED CAUTION! A non-hardening viscous sealant applied to the inner liner of each tire fills punctures up to 0.19 in. (5 mm) to To avoid damage to your vehicle or tires, observe the following precautions: minimize the loss of air pressure.
Page 280: Snow Tires
280 STARTING AND OPERATING NOTE: In order to avoid damage to tires, chains, and Snow tires generally have lower speed ratings than what your vehicle do not drive for a prolonged period of time was originally equipped with your vehicle and should on dry pavement.
Page 281: Tire Pressure Monitor System (Tpms) - If Equipped
STARTING AND OPERATING 281 Follow the “Maintenance Schedules” in Section 8 of this TIRE PRESSURE MONITOR SYSTEM (TPMS) — IF manual for the recommended tire rotation frequency for EQUIPPED your type of driving. Remember, more frequent rotation • The Tire Pressure Monitor System (TPMS) will warn is permissible if desired.
Page 282 282 STARTING AND OPERATING • The TPM System will warn the driver of a low tire − For example, your vehicle may have a recom- pressure if the tire pressure falls below the low- mended cold (parked for more than 3 hours) placard pressure warning limit for any reason, including low pressure of 30 psi (207 kPa).
Page 283 STARTING AND OPERATING 283 NOTE: CAUTION! • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire • The TPMS has been optimized for the original failure or condition. equipment tires and wheels. TPMS pressures and warning have been established for the tire size •...
Page 284: Base System - If Equipped
284 STARTING AND OPERATING as possible, check the inflation pressure of each tire on Base System — If Equipped The Tire Pressure Monitor System (TPMS) uses wireless your vehicle, and inflate each tire to the vehicle’s recom- technology with wheel rim mounted electronic sensors to mended cold placard pressure value.
Page 285: Premium System - If Equipped
STARTING AND OPERATING 285 tire. However, if you install the compact spare tire in NOTE: It is particularly important for you to check the place of a road tire that has a pressure below the tire pressure in all of the tires on your vehicle regularly low-pressure warning limit, the Tire Pressure Monitoring and to maintain the proper pressure.
Page 286 286 STARTING AND OPERATING pressure in the spare tire will not cause the Tire Pressure Tire Pressure Monitoring Low Pressure Warnings The Tire Pressure Monitoring Telltale Light will Monitoring Telltale Light to illuminate or the chime to illuminate in the instrument cluster and an audible sound.
Page 287 STARTING AND OPERATING 287 Check TPMS Warning The Tire Pressure Monitoring Telltale Light will flash on and off for 60 seconds and an audible chime will sound when a system fault is detected. The flash cycle will repeat every ten minutes, without an audible chime, until the fault condition no longer exists.
Page 288: General Information
288 STARTING AND OPERATING NOTE: The compact spare tire (if so equipped) does not General Information have a tire pressure monitoring sensor. Therefore, the This device complies with part 15 of the FCC rules and TPMS will not monitor the pressure in the compact spare RSS 210 of Industry Canada.
Page 289: Fuel Requirements
STARTING AND OPERATING 289 FUEL REQUIREMENTS Light spark knock at low engine speeds is not harmful to your engine. However, continued heavy spark knock at 2.7L Engine high speeds can cause damage and immediate service is Your vehicle is designed to meet all emis- required.
Page 290: Reformulated Gasoline
290 STARTING AND OPERATING Reformulated Gasoline CAUTION! Many areas of the country require the use of cleaner burning gasoline referred to as “Reformulated Gasoline”. DO NOT use gasolines containing Methanol or E85 Ethanol. Use of these blends may result in starting Reformulated gasolines contain oxygenates, and are spe- and driveability problems and may damage critical cifically blended to reduce vehicle emissions and im-...
Page 291: Materials Added To Fuel
STARTING AND OPERATING 291 • The use of leaded gas is prohibited by Federal law. content of gasoline may not be indicated on the pump, you should ask your gasoline retailer if his/her gasoline Using leaded gasoline can impair engine performance, contains MMT.
Page 292: Carbon Monoxide Warnings
292 STARTING AND OPERATING • Guard against carbon monoxide with proper mainte- Carbon Monoxide Warnings nance. Have the exhaust system inspected every time the vehicle is raised. Have any abnormal conditions WARNING! repaired promptly. Until repaired, drive with all side windows fully open.
Page 293: Adding Fuel
STARTING AND OPERATING 293 ADDING FUEL NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door Fuel Filler Cap (Gas Cap) reinforcement. The gas cap is located behind the fuel filler door on the left side of the vehicle.
Page 294 294 STARTING AND OPERATING WARNING! CAUTION! • Never have any smoking materials lit in or near • Damage to the fuel system or emission control the vehicle when the gas cap is removed or the system could result from using an improper fuel tank filled.
Page 295: Loose Fuel Filler Cap Message
STARTING AND OPERATING 295 Loose Fuel Filler Cap Message VEHICLE LOADING If the vehicle diagnostic system determines that the fuel The load carrying capacity of your vehicle is shown on filler cap is loose, improperly installed, or damaged, a the “Vehicle Certification Label.” This information “Check Gascap”...
Page 296: Gross Vehicle Weight Rating (Gvwr)
296 STARTING AND OPERATING • Month Day and Hour of Manufacture (MDH) Overloading The load carrying components (axle, springs, tires, The bar code allows a computer scanner to read the wheels, etc.) of your vehicle will provide satisfactory Vehicle Identification Number (VIN). service as long as you do not exceed the GVWR and front Gross Vehicle Weight Rating (GVWR) and rear GAWR.
Page 297: Loading
STARTING AND OPERATING 297 Loading To load your vehicle properly, first figure out its empty weight, axle by axle and side by side. Store heavier items down low and be sure you distribute their weight as evenly as possible. Stow all loose items securely before driving.
Page 298: Trailer Towing
298 STARTING AND OPERATING NOTE: Refer to the “Vehicle Certification Label” at- Gross Trailer Weight (GTW) tached to the rear of the driver’s door for your vehicle’s The gross trailer weight (GTW) is the weight of the trailer GVWR and GAWRs. This table is only an example. plus the weight of all cargo, consumables, and equipment (permanent or temporary) loaded in or on the trailer in its TRAILER TOWING...
Page 299 STARTING AND OPERATING 299 Weight-Carrying Hitch WARNING! A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or It is important that you do not exceed the maximum some other connecting point of the vehicle. These kinds front or rear GAWR.
Page 300 300 STARTING AND OPERATING WARNING! • An improperly adjusted Weight Distributing Hitch system may reduce handling, stability, braking performance, and could result in an acci- dent. • Weight Distributing Systems may not be compat- ible with Surge Brake Couplers. Consult with your hitch and trailer manufacturer or a reputable Recreational Vehicle dealer for additional infor- mation.
Page 301: Trailer Hitch Classification
STARTING AND OPERATING 301 tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Refer to the “Trailer Towing Weights (Maximum Trailer Weight Ratings)” chart for the Max. GTW towable for your given drivetrain.
Page 302 302 STARTING AND OPERATING Engine/Transmission Frontal Area Max. GTW (Gross Trailer Max. Tongue Wt. Wt.) 2.7L Automatic 22 SQ. FT. (2.04 square Up to 2 persons & Lug- 100 lbs (45 kg) meters) gage 1,000 lbs (454 kg) 22 SQ. FT. (2.04 square Up to 3 persons &...
Page 303: Trailer And Tongue Weight
STARTING AND OPERATING 303 Trailer and Tongue Weight Consider the following items when computing the Always load a trailer with 60% to 65% of the weight in weight on the rear axle of the vehicle: the front of the trailer. This places 10% to 15% of the •...
Page 304: Towing Requirements
304 STARTING AND OPERATING Towing Requirements WARNING! To promote proper break-in of your new vehicle driv- etrain components the following guidelines are recom- Improper towing can lead to an injury accident. mended: Follow these guidelines to make your trailer towing as safe as possible: Make certain that the load is secured in the trailer CAUTION!
Page 305 STARTING AND OPERATING 305 • Vehicles with trailers should not be parked on a grade. − Proper tire inflation pressures are essential to the safe When parking, apply the parking brake on the tow and satisfactory operation of your vehicle. Refer to vehicle.
Page 306 306 STARTING AND OPERATING Towing Requirements — Trailer Brakes CAUTION! − Do not interconnect the hydraulic brake system or If the trailer weighs more than 1,000 lbs (454 kg) vacuum system of your vehicle with that of the trailer. loaded, it should have its own brakes, and they This could cause inadequate braking and possible should be of adequate capacity.
Page 307 STARTING AND OPERATING 307 Towing Requirements — Trailer Lights & Wiring Whenever you pull a trailer, regardless of the trailer size, stop lights and turn signals on the trailer are required for motoring safety. The Trailer Tow Package may include a 4 and 7 pin wiring harness.
Page 308: Towing Tips
308 STARTING AND OPERATING NOTE: Using the “3” range while operating the vehicle under heavy operating conditions will improve perfor- mance and extend transmission life by reducing exces- sive shifting and heat build up. This action will also provide better engine braking. The automatic transmission fluid and filter should be changed if you REGULARLY tow a trailer for more than 45 minutes of continuous operation.
Page 309: Recreational Towing (Behind Motorhome, Etc.)
STARTING AND OPERATING 309 Towing Tips — Autostick (If Equipped) − Highway Driving Reduce speed. − For vehicles equipped with Autostick. By using the Autostick modes, and selecting a specific gear range, − Air Conditioning frequent shifting can be avoided. The highest gear Turn off temporarily.
Page 311: What To Do In Emergencies
WHAT TO DO IN EMERGENCIES CONTENTS Hazard Warning Flasher ....312 Jump-Starting Procedures ....322 If Your Engine Overheats .
Page 312: Hazard Warning Flasher
312 WHAT TO DO IN EMERGENCIES This is an emergency warning system and it should not HAZARD WARNING FLASHER The hazard flasher switch is located in the center of the be used when the vehicle is in motion. Use it when your instrument panel between the center air outlets.
Page 313 WHAT TO DO IN EMERGENCIES 313 NOTE: There are steps that you can take to slow down WARNING! an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to A hot engine cooling system is dangerous. You or the engine cooling system and turning off the A/C others could be badly burned by steam or boiling removes this heat.
Page 314: Jacking And Tire Changing
314 WHAT TO DO IN EMERGENCIES JACKING AND TIRE CHANGING Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the WARNING! edge of the roadway as possible. Avoid icy or slippery areas. • Do not attempt to change a tire on the side of the 2.
Page 315: Jack Location/Spare Tire Stowage
WHAT TO DO IN EMERGENCIES 315 5. Passengers should not remain in the vehicle when the vehicle is being jacked. 6. Block both the front and rear of the wheel diagonally opposite the jacking position. For example, if changing the right front tire, block the left rear wheel. Jack Location/Spare Tire Stowage The jack and spare tire are both stowed under an access cover in the trunk.
Page 316 316 WHAT TO DO IN EMERGENCIES 3. Remove the fastener securing the spare tire. Jack Fastener Spare Tire Fastener WARNING! 4. Remove the spare tire. A loose tire or jack thrown forward in a collision or 5. Remove the fastener securing the jack. hard stop could endanger the occupants of the ve- hicle.
Page 317: Jacking And Changing A Tire
WHAT TO DO IN EMERGENCIES 317 Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked. 2. Remove the spare tire, jack, and lug wrench. 3.
Page 318 318 WHAT TO DO IN EMERGENCIES 4. Before raising the vehicle, use the lug wrench to 5. Place the jack underneath the lift area that is closest to loosen, but not remove, the lug nuts on the wheel with the flat tire. Turn the jack screw clockwise to firmly the flat tire.
Page 319 WHAT TO DO IN EMERGENCIES 319 Jack Engagement Locations...
Page 320: Compact Spare Tire
320 WHAT TO DO IN EMERGENCIES 6. Raise the vehicle just enough to remove the flat tire 12. Store the flat tire, jack, and tools. and install the spare tire. WARNING! WARNING! A loose tire or jack thrown forward in a collision or Raising the vehicle higher than necessary can make hard stop could endanger the occupants of the ve- the vehicle less stable.
Page 321: Wheel Cover Installation (If Required)
WHAT TO DO IN EMERGENCIES 321 Wheel Cover Installation (If Required) 1. Tighten the two lug nuts on the mounting studs on each side of the stud, which is in alignment with the valve stem. 2. Align the valve notch in the wheel cover with the valve stem on the wheel.
Page 322: Jump-Starting Procedures
322 WHAT TO DO IN EMERGENCIES NOTE: The battery is stored under an access cover in JUMP-STARTING PROCEDURES the trunk. Remote battery terminals are located in the engine compartment for jump-starting. WARNING! • 1. Wear eye protection and remove any metal jewelry Take care to avoid the radiator cooling fan whenever the such as watchbands or bracelets that might make an hood is raised.
Page 323 WHAT TO DO IN EMERGENCIES 323 5. Connect one end of the jumper cable to the remote WARNING! jump-start positive battery post (+) in the engine com- • You should not try to start your vehicle by push- partment. Connect the other end of the same cable to the positive terminal of the booster battery.
Page 324: Freeing A Stuck Vehicle
324 WHAT TO DO IN EMERGENCIES 8. When removing the jumper cables, reverse the above FREEING A STUCK VEHICLE sequence exactly. Be careful of the moving belts and fan. If your vehicle becomes stuck in mud, sand, or snow, it can often be moved by a rocking motion.
Page 325: Towing A Disabled Vehicle
WHAT TO DO IN EMERGENCIES 325 TOWING A DISABLED VEHICLE CAUTION! WITHOUT THE IGNITION KEY • When “rocking” a stuck vehicle by moving be- Special care must be taken when the vehicle is towed tween “First” and R (Reverse), do not spin the with the ignition in the LOCK position.
Page 326: Towing This Vehicle Behind Another Vehicle With A Tow Dolly
326 WHAT TO DO IN EMERGENCIES km/h). Exceeding these towing limits may cause a trans- If you must use the accessories (wipers, defrosters, etc.) mission geartrain failure. If the transmission is not op- while being towed, the key must be in the ON position, erative, or if the vehicle is to be towed more than 30 miles not the ACCESSORY position.
Page 327: Maintaining Your Vehicle
MAINTAINING YOUR VEHICLE CONTENTS ▫ Drive Belts — Check Condition And Tension . . 340 2.7L Engine Compartment ....329 ▫ Spark Plugs ......340 3.5L Engine Compartment .
Page 328 328 MAINTAINING YOUR VEHICLE ▫ Windshield Washers/Headlight Washers — If ▫ Fuses (Rear Power Distribution Center) ..366 Equipped ......347 Vehicle Storage .
Page 329: 2.7L Engine Compartment
MAINTAINING YOUR VEHICLE 329 2.7L ENGINE COMPARTMENT...
Page 330: 3.5L Engine Compartment
330 MAINTAINING YOUR VEHICLE 3.5L ENGINE COMPARTMENT...
Page 331: L Engine Compartment
MAINTAINING YOUR VEHICLE 331 5.7L ENGINE COMPARTMENT...
Page 332: Onboard Diagnostic System - Obd Ii
332 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors Prolonged driving with the “Malfunction Indicator the performance of the emissions, engine, and automatic Light”...
Page 333: Emissions Inspection And Maintenance Programs
MAINTAINING YOUR VEHICLE 333 A loose, improperly installed, or damaged fuel filler cap Your vehicle has a simple ignition key actuated test, may also turn on the Malfunction Indicator Light (MIL). which you can use prior to going to the test station. To check if your vehicle’s OBD system is ready, you must do EMISSIONS INSPECTION AND MAINTENANCE the following:...
Page 334: Replacement Parts
334 MAINTAINING YOUR VEHICLE b. The MIL will not flash at all and will remain fully REPLACEMENT PARTS illuminated until you turn off the ignition key or Use of genuine Mopar parts for normal/scheduled start the engine. This means that your vehicle’s OBD maintenance and repairs is highly recommended to in- system is ready and you can proceed to the I/M sure the designed performance.
Page 335: Maintenance Procedures
MAINTAINING YOUR VEHICLE 335 Engine Oil WARNING! Checking Oil Level — 2.7L, 3.5L Engines You can be badly injured working on or around a To assure proper engine lubrication, the engine oil must motor vehicle. Only do service work for which you be maintained at the correct level.
Page 336 336 MAINTAINING YOUR VEHICLE The best time to check the engine oil level is about 5 minutes after a fully warmed engine is shut off or before starting the engine after it has sat overnight. Checking the oil while the vehicle is on level ground will improve the accuracy of the oil level readings.
Page 337 MAINTAINING YOUR VEHICLE 337 • Off-Road or desert operation. CAUTION! NOTE: If ANY of these apply to you, then change your Overfilling or underfilling will cause oil aeration or engine oil every 3,000 miles (5 000 km) or 3 months, loss of oil pressure.
Page 338 338 MAINTAINING YOUR VEHICLE NOTE: Vehicles equipped with a 5.7L engine must use American Petroleum Institute (API) Engine Oil Identification Symbol SAE 5W-20 oil. Failure to do so may result in improper This symbol means that the oil has operation of the Multiple Displacement System (MDS). been certified by the American Refer to “Multi Displacement System”...
Page 339 MAINTAINING YOUR VEHICLE 339 Engine Oil Viscosity (SAE Grade) — 3.5L Engine In areas where these grades are not generally available, SAE 10W-30 engine oil is preferred for use in 3.5L higher SAE grades may be used. Lubricants that have Engines within the operating temperatures shown in the both an SAE grade number and the API Certification engine oil viscosity chart.
Page 340: Engine Oil Filter
340 MAINTAINING YOUR VEHICLE should be inspected at the specified intervals and re- Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and placed if required. Improper belt tension can cause belt oil filters from your vehicle.
Page 341: Lp;&-2Qengine Air Cleaner Filter
MAINTAINING YOUR VEHICLE 341 Engine Air Cleaner Filter Fuel Filter For normal driving conditions, inspect and replace the A plugged fuel filter can cause stalling, limit the speed at engine air cleaner filter at the intervals shown on Sched- which a vehicle can be driven or cause hard starting. ule “A.”...
Page 342 342 MAINTAINING YOUR VEHICLE WARNING! CAUTION! A hot exhaust system can start a fire if you park over Damage to the catalytic converter can result if your materials that can burn. Such materials might be vehicle is not kept in proper operating condition. In grass or leaves coming into contact with your ex- the event of engine malfunction, particularly involv- haust system.
Page 343: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 343 • Do not try to start engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idling or malfunctioning operating conditions.
Page 344: Air Conditioner Maintenance
344 MAINTAINING YOUR VEHICLE WARNING! CAUTION! • Battery fluid is a corrosive acid solution and can • It is essential when replacing the cables on the burn or even blind you. Don’t allow battery fluid battery that the positive cable is attached to the to contact your eyes, skin, or clothing.
Page 345: A/C Air Filter - If Equipped
MAINTAINING YOUR VEHICLE 345 Refrigerant Recovery and Recycling WARNING! R-134a Air Conditioning Refrigerant is a hydrofluorocar- • Use only refrigerants and compressor lubricants bon (HFC) that is endorsed by the Environmental Pro- tection Agency and is an ozone-saving product. How- approved by the manufacturer for your air condi- ever, the manufacturer recommends that air conditioning tioning system.
Page 346: Power Steering - Fluid Check
346 MAINTAINING YOUR VEHICLE surfaces. Refer to “Fluids, Lubricants, and Genuine Refer to the “Maintenance Schedule” in this manual for the recommended air conditioning filter replacement Parts” in this section for the correct fluid type. intervals. Front & Rear Suspension Ball Joints The suspension ball joints should be inspected for exter- Power Steering —...
Page 347: Windshield Wiper Blades
MAINTAINING YOUR VEHICLE 347 The external lock cylinders should be lubricated twice a Windshield Washers/Headlight Washers — If year, preferably in the fall and spring. Apply a small Equipped amount of a high quality lubricant such as Mopar Lock The windshield washer and the headlight washer (if Cylinder Lubricant or equivalent directly into the lock equipped) share the same fluid reservoir.
Page 348: Exhaust System
348 MAINTAINING YOUR VEHICLE Exhaust System WARNING! The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust Exhaust gases can injure or kill. They contain carbon system. monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can Whenever a change is noticed in the sound of the exhaust eventually poison you.
Page 349: Cooling System
MAINTAINING YOUR VEHICLE 349 Cooling System Coolant Checks Check engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where WARNING! applicable). If coolant is dirty or rusty in appearance, the • When working near the radiator cooling fan, dis- system should be drained, flushed and refilled with fresh coolant.
Page 350 350 MAINTAINING YOUR VEHICLE Cooling System — Drain, Flush, and Refill CAUTION! The system should be drained, flushed, and refilled at the intervals shown on the Maintenance Schedule. • Mixing of coolants other than specified HOAT engine coolants, may result in engine damage and If the solution is dirty or contains a considerable amount may decrease corrosion protection.
Page 351 MAINTAINING YOUR VEHICLE 351 Adding Coolant solution. The use of lower quality water will reduce Your vehicle has been built with an improved engine the amount of corrosion protection in the engine coolant that allows extended maintenance intervals. This cooling system. coolant can be used up to 5 Years or 100,000 miles (160 Please note that it is the owner’s responsibility to main- 000 km) before replacement.
Page 352 352 MAINTAINING YOUR VEHICLE ground. If ingested by a child, contact a physician WARNING! immediately. Clean up any ground spills immediately. • The warning words “DO NOT OPEN HOT” on Coolant Level the cooling system pressure cap are a safety pre- The coolant bottle provides a quick visual method for caution.
Page 353: Hoses And Vacuum/Vapor Harnesses
MAINTAINING YOUR VEHICLE 353 • Make sure that the radiator and coolant recovery humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot coolant to bottle overflow hoses are not kinked or obstructed. enter the radiator. •...
Page 354: Fuel System
354 MAINTAINING YOUR VEHICLE Insure nylon tubing in these areas has not melted or Brake System collapsed. In order to assure brake system performance, all brake system components should be inspected periodically. Inspect all hose connections such as clamps and cou- Suggested service intervals can be found in the “Mainte- plings to make sure they are secure and no leaks are nance Schedule”...
Page 355 MAINTAINING YOUR VEHICLE 355 Insure nylon tubing in these areas has not melted or WARNING! collapsed. Worn brake hoses can burst and cause brake failure. Inspect all hose connections such as clamps and cou- You could have an accident. If you see any signs of plings to make sure they are secure and no leaks are cracking, scuffing, or worn spots, have the brake present.
Page 356: Automatic Transmission
356 MAINTAINING YOUR VEHICLE Add enough fluid to bring the level up to the require- Use only brake fluid that has been in a tightly closed ments described on the brake fluid reservoir. With disc container to avoid contamination from foreign matter or brakes, fluid level can be expected to fall as the brake moisture.
Page 357 MAINTAINING YOUR VEHICLE 357 Severe Usage (fluid and filter) — Refer to Maintenance CAUTION! Schedule “B” • Using a transmission fluid other than the manu- Severe Usage is defined as: facturer’s recommended fluid may cause deterio- • Police, taxi, limousine, commercial type operation, or ration in transmission shift quality and/or torque trailer towing where the vehicle is driven regularly for converter shudder.
Page 358: All Wheel Drive (Awd) - If Equipped
358 MAINTAINING YOUR VEHICLE All Wheel Drive (AWD) — If Equipped Transfer Case Refer to Maintenance The all wheel drive system consists of a Transfer Case Schedule “A” and Front Differential. The exterior surface of these Severe Usage components should be inspected for evidence of fluid Front Differential No Service Required leaks.
Page 359: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 359 • Stone and gravel impact. Appearance Care and Protection from Corrosion • Insects, tree sap, and tar. Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo- • Salt in the air near seacoast localities. graphic locations and usage.
Page 360 360 MAINTAINING YOUR VEHICLE • If you carry special cargo such as chemicals, fertilizers, CAUTION! de-icer salt, etc., be sure that such materials are well packaged and sealed. Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will •...
Page 361 MAINTAINING YOUR VEHICLE 361 Interior Care WARNING! Use Mopar Fabric Cleaner or equivalent to clean fabric upholstery and Mopar Carpet Cleaner for carpeting. Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in Interior Trim should be cleaned starting with a damp closed areas they may cause respiratory harm.
Page 362: Cleaning The Center Console Cup Holders
362 MAINTAINING YOUR VEHICLE cleaner. Use caution when cleaning the inside rear win- If the belts need cleaning, use Mopar Total Clean, a mild dow equipped with electric defrosters or the right rear soap solution, or lukewarm water. Do not remove the quarter window equipped with the radio antenna.
Page 363: Cleaning The Center Console Cup Holders - 300C And 300 Touring Models
MAINTAINING YOUR VEHICLE 363 • Carefully tuck the front, followed by the rear, then side edges of the cup holder into the center console. Cleaning the Center Console Cup Holders — 300C and 300 Touring Models Clean with a damp cloth or towel using a mild detergent with the cup holder in the center console.
Page 364 364 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse — 20 Amp Left High Intensity Dis- — 5 Amp Powertrain Control Yellow charge (HID) Headlight Orange Module (PCM)/Starter - if equipped —...
Page 365 MAINTAINING YOUR VEHICLE 365 Cavity Car- Mini Description CAUTION! tridge Fuse Fuse • When installing the Power Distribution Center 50 Amp — Radiator Fan cover, it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so 20 Amp —...
Page 366: Fuses (Rear Power Distribution Center)
366 MAINTAINING YOUR VEHICLE Fuses (Rear Power Distribution Center) There is also a power distribution center located in the trunk under the spare tire access panel. This center contains fuses and relays. Rear Power Distribution Center Opening The Access Panel...
Page 367 MAINTAINING YOUR VEHICLE 367 Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse 60 Amp — Ignition Off Draw (IOD) 13 * — — — Yellow — 10 Amp AC Heater Control/ 40 Amp — Battery Cluster/Sentry Key Re- Green...
Page 368 368 MAINTAINING YOUR VEHICLE Cavity Car- Mini Description Cavity Car- Mini Description tridge Fuse tridge Fuse Fuse Fuse — — — — 5 Amp Amplifier - if equipped/ Orange Antenna/Ignition — 10 Amp Airbag/Airbag Control Delay/Overhead Module (ACM) Console/Passenger Door —...
Page 369 MAINTAINING YOUR VEHICLE 369 *Cavities 11, 12, and 13 contain self-resetting fuses (circuit Cavity Car- Mini Description breakers) that are only serviceable by an authorized tridge Fuse dealer. The Cluster (without power memory seat), the Fuse Driver Seat Switch (with power memory seat), and the —...
Page 370: Vehicle Storage
370 MAINTAINING YOUR VEHICLE VEHICLE STORAGE CAUTION! If you are leaving your vehicle dormant for more than 21 days, you may want to take steps to protect your battery. • When installing the Power Distribution Center You may: cover, it is important to ensure the cover is prop- erly positioned and fully latched.
Page 371: Replacement Bulbs
MAINTAINING YOUR VEHICLE 371 REPLACEMENT BULBS Front Sidemarker ..W5W (Serviced at Dealer) Tail/Stop/Turn Light ..... 3057 LIGHT BULBS —...
Page 372: Bulb Replacement
372 MAINTAINING YOUR VEHICLE BULB REPLACEMENT Low Beam Headlight, High Beam Headlight, Park/Turn Light, Inner Park Light, and Outer Park Light – 300 Models 1. Open the hood. NOTE: Removal of the air cleaner filter housing may be necessary prior to replacing bulbs in the headlight assem- bly on the driver side of the vehicle.
Page 373 MAINTAINING YOUR VEHICLE 373 3 — Park/Turn Light Bulb 4 — Inner Park Light Bulb 5 — Outer Park Light Bulb...
Page 374: Low Beam Headlight, High Beam Headlight
374 MAINTAINING YOUR VEHICLE WARNING! CAUTION! A transient high tension occurs at the bulb sockets of Do not touch the new bulb with your fingers. Oil High Intensity Discharge (HID) headlights when the contamination will severely shorten bulb life. If the headlight switch is turned ON.
Page 375 MAINTAINING YOUR VEHICLE 375 4. Push the replacement bulb into the socket assembly. 5. Reinstall the bulb and socket assembly into the head- light assembly, and then turn it clockwise. 3 — Park/Turn Light Bulb CAUTION! Do not touch the new bulb with your fingers. Oil 1 —...
Page 376: Backup Light, Side Marker Light, And Tail/Stop Turn Light - 300 Models
376 MAINTAINING YOUR VEHICLE 3. Pull back the trunk liner. Backup Light, Side Marker Light, and Tail/Stop Turn Light — 300 Models 4. Remove the remaining fastener from the back of the 1. Open the Trunk. tail light assembly. 2. Remove two fasteners from the back of the tail light 5.
Page 377 MAINTAINING YOUR VEHICLE 377 7. Pull the tail light assembly clear from the vehicle to access the bulbs. 8. Turn the appropriate bulb and socket assembly counter-clockwise to remove it from the tail light assem- bly. 2 — Side Marker Light Bulb 1 —...
Page 378: Tail/Stop, Tail, Turn Signal Light, And Backup Light - 300C Models
378 MAINTAINING YOUR VEHICLE Tail/Stop, Tail, Turn Signal Light, and Backup Light — 300C Models 1. Open the Trunk. 2. Remove two fasteners from the back of the tail light assembly. 3 — Tail/Stop/Turn Light Bulb 9. Pull the bulb out of the socket assembly. 10.
Page 379 MAINTAINING YOUR VEHICLE 379 3. Pull back the trunk liner. 7. Pull the tail light assembly clear from the vehicle to access the bulbs. Turn bulb sockets counter-clockwise to 4. Remove the remaining fastener from the back of the remove. tail light assembly.
Page 380 380 MAINTAINING YOUR VEHICLE 2 — Tail Light Bulb 3 — Turn Signal Light Bulb...
Page 381: License Light
MAINTAINING YOUR VEHICLE 381 License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly. 3. Pull the bulb out of the socket assembly. 4 — Backup Light Bulb 9. Pull the bulb out of the socket assembly. 10.
Page 382: Fluids And Capacities
382 MAINTAINING YOUR VEHICLE FLUIDS AND CAPACITIES 3.5 Liter Engine without All 11.1 qts 10.5 li- Wheel Drive (Mopar ters U.S. Metric Antifreeze/Coolant 5 Year/ Fuel (approximate) 100,000 Mile Formula) or 2.7 Liter Engine 18 gal- 68 liters equivalent. lons 3.5 Liter Engine with All Wheel 11.4 qts 10.8 li-...
Page 383: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 383 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluids, Lubricants, and Genuine Parts Engine Coolant Mopar Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) or equivalent Engine Oil (2.7 Liter) Use API Certified engine oil. SAE 5W-20 is recommended. Refer to the engine oil fill cap for the correct SAE grade meeting DaimlerChrysler Material Standard MS- 6395.
Page 384: Chassis
384 MAINTAINING YOUR VEHICLE Chassis Component Fluids, Lubricants, and Genuine Parts Automatic Transmission Mopar ATF+4 Automatic Transmission Fluid. Brake Master Cylinder Mopar DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only recommended brake fluids.
Page 385 MAINTENANCE SCHEDULES CONTENTS ▫ Schedule “B” ......389 Emission Control System Maintenance ..386 ▫...
Page 386: Emission Control System Maintenance
386 MAINTENANCE SCHEDULES EMISSION CONTROL SYSTEM MAINTENANCE MAINTENANCE SCHEDULES The “Scheduled” maintenance services, listed in bold NOTE: type must be done at the times or mileages specified to • For vehicles equipped with a 2.7L engine, follow assure the continued proper functioning of the emission Schedule “A”...
Page 387 MAINTENANCE SCHEDULES 387 • Extensive engine idling. NOTE: Most vehicles are operated under the conditions listed for Schedule B. • Driving in dusty conditions. Second is Schedule “A.” It is for vehicles that are not • Short trips of less than 10 miles (16 km). operated under any of the conditions listed under Sched- •...
Page 388 388 MAINTENANCE SCHEDULES • Check all lights and all other electrical items for correct At Each Stop for Fuel operation. • Check the engine oil level about 5 minutes after a fully • Check rubber seals on each side of the radiator for warmed engine is shut off.
Page 389: Schedule "B" 389
SCHEDULE “B” 389 • Trailer towing. SCHEDULE “B” Follow Schedule “B” if you usually operate your vehicle • Taxi, police or delivery service (commercial ser- under one or more of the following conditions. vices). Change the automatic transmission fluid and filter every •...
Page 390 390 SCHEDULE “B” Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 391 SCHEDULE “B” 391 Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 392 392 SCHEDULE “B” Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 393 SCHEDULE “B” 393 Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (110 000) (115 000) (120 000) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 394 394 SCHEDULE “B” Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter, if not replaced at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 395 SCHEDULE “B” 395 Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 396 396 SCHEDULE “B” Miles 108,000 111,000 114,000 117,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 397 SCHEDULE “B” 397 Miles 123,000 126,000 129,000 132,000 135,000 (Kilometers) (205 000) (210 000) (215 000) (220 000) (225 000) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 398 398 SCHEDULE “B” Miles 138,000 141,000 144,000 147,000 150,000 (Kilometers) (230 000) (235 000) (240 000) (245 000) (250 000) Change engine oil and engine oil filter, if not re- placed at 3 months. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 399: Schedule "A" 399
SCHEDULE “A” 399 SCHEDULE “A” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [12] [18] [24] [30] [36] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 400 400 SCHEDULE “A” Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (110 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter.
Page 401 SCHEDULE “A” 401 Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 402 402 SCHEDULE “A” Miles 108,000 114,000 120,000 126,000 132,000 (Kilometers) (180 000) (190 000) (200 000) (210 000) (220 000) [Months] [108] [114] [120] [126] [132] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if re- quired.* Replace the air cleaner filter.
Page 403 SCHEDULE “A” 403 Miles 138,000 144,000 150,000 (Kilometers) (230 000) (240 000) (250 000) [Months] [138] [144] [150] Change engine oil and engine oil filter. Inspect the air cleaner filter and replace if required.* Replace the air cleaner filter. Inspect the front and rear brake linings and rotors. Replace the air conditioning filter.
Page 405: If You Need Consumer Assistance
IF YOU NEED CONSUMER ASSISTANCE CONTENTS Suggestions For Obtaining Service For Your Reporting Safety Defects ....409 Vehicle ......406 ▫...
Page 406: Suggestions For Obtaining Service For Your Vehicle
Keep a maintenance log of your vehicle’s Warranty service must be done by an authorized service history. This can often provide a clue to the Chrysler, Dodge, or Jeep dealer. We strongly recommend current problem. that you take your vehicle to your selling dealer. They...
Page 407 IF YOU NEED CONSUMER ASSISTANCE 407 • If for some reason you are still not satisfied, talk to the DaimlerChrysler Canada Inc. Customer Center general manager or owner of the dealership. They P.O. Box 1621 want to know if you need assistance. Windsor, Ontario N9A 4H6 Phone —(800) 465–2001 •...
Page 408: Warranty Information (U.s. Vehicles Only)
408 IF YOU NEED CONSUMER ASSISTANCE We appreciate that you have made a major investment Service Contract You may have purchased a service contract for your when you purchased your new vehicle. Your dealer has vehicle to help protect you from the high cost of unex- also made a major investment in facilities, tools, and pected repairs after your manufacturer’s new vehicle training to assure that you are absolutely delighted with...
Page 409: Reporting Safety Defects
IF YOU NEED CONSUMER ASSISTANCE 409 REPORTING SAFETY DEFECTS In Canada: In the 50 United States and Washington D.C.: If you If you believe that your vehicle has a safety defect, you believe that your vehicle has a defect, which could cause should contact the Customer Service Department imme- a crash or cause injury or death, you should immediately diately.
Page 410: Department Of Transportation Uniform Tire Quality Grades
These manuals have been prepared with the assistance of the tires on your car. of service and engineering specialists to acquaint you with specific Chrysler group vehicles. Included are All Passenger Car Tires Must Conform to Federal Safety starting, operating, emergency and maintenance pro- Requirements in Addition to These Grades.
Page 411: Treadwear
IF YOU NEED CONSUMER ASSISTANCE 411 Treadwear WARNING! The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled con- The traction grade assigned to this tire is based on ditions on a specified government test course. For ex- straight-ahead braking traction tests, and does not ample, a tire graded 150 would wear one and a half (1 include acceleration, cornering, hydroplaning, or...
Page 412 412 IF YOU NEED CONSUMER ASSISTANCE WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
Page 413 INDEX...
Page 414 414 INDEX ABS (Anti-Lock Brake System) ... . . 253 Alarm (Security Alarm) ....168 Adaptive Cruise Control (ACC) Alarm System (Security Alarm) .
Page 415 INDEX 415 Autostick ......249 Brake Assist System ..... 258 Fluid and Filter Changes .
Page 416 416 INDEX Cassette Tape and Player Maintenance ..217 Console ......153 Catalytic Converter .
Page 417 INDEX 417 Dealer Service ......334 Emergency, In Case of Defroster, Rear Window ....229 Freeing Vehicle When Stuck .
Page 418 418 INDEX Oil Selection ..... . 337,382 Flooded Engine Starting ....235 Oil Synthetic .
Page 419 INDEX 419 Gauge ......168 Gross Axle Weight Rating ....296,298 Hoses .
Page 420 420 INDEX High Beam/Low Beam Select (Dimmer) Interior Appearance Care ....361 Switch ....... 107 Interior Fuses .
Page 421 INDEX 421 Latch Plate ......34 Headlights ..... . . 103,374 Latches .
Page 422 422 INDEX Vanity Mirror ......71 Malfunction Indicator Light Voltage ......170 (Check Engine) .
Page 423 INDEX 423 Navigation Radio ..... . . 206 Operating Precautions ....332 Navigation System .
Page 424 424 INDEX Outlet (Auxiliary Electrical Outlet) ..149 Rain Sensitive Wiper System ....111 Seats ....... 92 Rear Park Assist System .
Page 425 INDEX 425 Safety Checks Inside Vehicle ....60 Heated ......95 Safety Checks Outside Vehicle .
Page 426 426 INDEX Slippery Surfaces, Driving On ... . . 250 Storing Your Vehicle ..... 370 SmartBeams .
Page 427 INDEX 427 Chains ......279 Torque Converter Clutch ....243 Changing .
Page 428 428 INDEX Transmitter Battery Service Vehicle Identification Number (VIN) ..6 (Remote Keyless Entry) ....21 Vehicle Loading .
Page 429 INDEX 429 Window Fogging ..... . . 227 Windshield Wiper Blades ....347 Windows .
Page 430 NOTES...
Page 431 NOTES...
Page 432 NOTES...

This manual is also suitable for:

2007 300

Chrysler 2007 LX 300C User Manual

Introduction 1

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

INTRODUCTION

Chapters

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Chrysler 2007 LX 300C

Summary of Contents for Chrysler 2007 LX 300C