Chrysler Sebring 2005 Service Manual page 1247

9 - 178 ENGINE 2.7L DOHC
CYLINDER HEAD (Continued)
Fig. 18 Camshaft Bearing Caps
(23) For right cylinder head removal:
• Remove cylinder head ground strap.
• Disconnect EGR valve electrical connector (if
equipped).
CAUTION: Ensure cylinder head bolts 11–9 (Fig. 20)
are removed before attempting the removal of cylin-
der head, as damage to cylinder head and/or block
may occur.
1 – CAMSHAFT BEARING CAP - INTAKE
2 – CAMSHAFT BEARING CAP - EXHAUST
3 – CAMSHAFT - EXHAUST
4 – ROCKER ARM
5 – HYDRAULIC LIFTER
6 – CYLINDER HEAD
Fig. 19 Camshaft & Valvetrain Components
(24) Remove cylinder
sequence of installation (Fig. 20) starting with bolts
11–9, then bolts 8–1.
Fig. 20 CYLINDER HEAD BOLTS
7 – CAMSHAFT (SECONDARY) CHAIN TENSIONER
8 – CYLINDER BLOCK
9 – CYLINDER HEAD
10 – CAMSHAFT - INTAKE
11 – CAMSHAFT (SECONDARY) TIMING CHAIN
head bolts in reverse
JR