Assembly - Chrysler Sebring 2005 Service Manual

21 - 272 41TE AUTOMATIC TRANSAXLE
FINAL DRIVE (Continued)
Fig. 177 Remove Bearing Cup
1 - SPECIAL TOOL 6062A
2 - DIFFERENTIAL BEARING RETAINER
DIFFERENTIAL SERVICE TOOLS
COMPONENT REMOVER
Diff. Bear. On 5048, 5048-4
Retainer Side Collets,
L-4539-2
Button
Diff. Bear. On 5048, 5048-3
Ext. Hous. Side Collets,
L-4539-2
Button
Diff. Race. On 6062-A
Retainer Side
Diff. Race. On L-4518
Ext. Hous. Side
Extension 7794-A, C-637
Housing Seal Slide Hammer
Bearing 794-A, C-637
Retainer Seal Slide Hammer

ASSEMBLY

NOTE: Use Mopar Silicone Rubber Adhesive Seal-
ant, or equivalent, on retainer and extension hous-
ing/adapter plate to seal to transaxle case.
(1) Position differential case to ring gear. Install
ring gear-to-differential case bolts and draw ring
gear into position (Fig. 178). Torque bolts to 95 N·m
(70 ft. lbs.).
1 - RING GEAR BOLTS
INSTALLER
5052, C-4171
L-4410, C-4171
6061, C-4171
L-4520, C-4171
L-4520, C-4171
L-4520, C-4171
1 - SIDE GEAR THRUST WASHER
Fig. 178 Ring Gear Bolt Removal/Installation
(2) Install side gear thrust washers (Fig. 179).
Fig. 179 Side Gear Washer
JR