Chrysler Sebring 2005 Service Manual page 1881

23 - 106 SEATS
HEADREST
REMOVAL
(1) Raise head restraint slightly.
(2) Insert a stiff wire into the hole on the right
hand side head restraint sleeve/guide and push to
release latch (Fig. 1).
(3) At the same time, press the button on the head
restraint sleeve/guide left hand side and pull upward
to release the head restraint.
(4) Remove head restraint from seat back.
Fig. 1 Head Restraint Removal
1 - SLEEVE GUIDE
2 - BUTTON
3 - STIFF WIRE
INSTALLATION
(1) Place head restraint in position.
(2) Push head restraint down into the lock posi-
tion.
(3) Raise head restraint to ensure it locks at the
last stop.
JR