Suzuki WagonR+ RB310 Service Manual page 1733

7F-20 REAR DIFFERENTIAL
TOOTH CONTACT PATTERN
Rear differential oil drain plug
Rear differential oil level/filler plug
Companion flange nut (reference)
Dynamic damper bolts
Drive bevel gear bolts
Differential side bearing cap bolts
Rear differential plug
Differential carrier bolts
Propeller shaft bolts
Material
Thread lock cement
Lithium grease
Sealant
Tightening Torque Specification
Fastening part
Required Service Material
Recommended SUZUKI product
(Part Number)
THREAD LOCK CEMENT 1322
(99000-32110)
SUZUKI SUPER GREASE A
(99000-25010)
SUZUKI BOND NO. 1215
(99000-31110)
DIAGNOSIS AND REMEDY
Irregular patterns: If the pattern is not oval, it means
that bevel gear is defective. High or low spots on tooth
surfaces or on the seat of bevel gear are the cause of
irregular patterns appearing on some teeth. The rem-
edy is to replace the pinion and-gear set and, if the
seat is defective, so is transfer case.
Tightening torque
N•m
55
50
70 – 250
23
90
23
23
23
23
Bevel gear bolts
Oil seal lips
• Thread part of differential carrier bolt
• Mating surface of differential carrier
• Mating surface of rear axle housing
kg-m lb-ft
5.5 40.0
5.0 36.5
7.0 – 25.0 51.0 – 181.0
2.3 17.0
9.0 65.0
2.3 17.0
2.3 17.0
2.3 17.0
2.3 17.0
Use