Suzuki WagonR+ RB310 Service Manual page 1553

10B-62 AIR BAG SYSTEM
[A]
(C)
STEERING WHEEL
[A] : Fig. for STEP 1 and 2
[B] : Fig. for STEP 2
[C] : For DTC B1083
[D] : For DTC B1087
1. Release tool
2. SDM connector "G66"
Special tool
(A) : 09932-76010
(B) : 09932-75010
(C) : 09932-78310
NOTE:
Upon completion of inspection and repair work, perform the following items.
• Reconnect all air bag system components, ensure all components are properly mounted.
• Clear diagnostic trouble code (Refer to DTC CLEARANCE), if any.
• Repeat AIR BAG DIAGNOSTIC SYSTEM CHECK to confirm that the trouble has been corrected.
DTC B1084 : Side Air Bag (Driver Side) Initiator Circuit Short to Power Circuit
DTC B1088 : Side Air Bag (Passenger Side) Initiator Circuit Short to Power Circuit
Step
1 1) With ignition switch OFF, disconnect side air
bag (inflator) module connector "G69" or
"G70" under front seat cushion.
2) Check proper connection to applicable side
air bag (inflator) module at terminals in
"G69" or "G70" connector.
3) If OK, then connect Special Tools (B) and
(C) to side air bag (inflator) module connec-
tor disconnected at the step 1).
With ignition switch ON, is DTC B1084 or
B1088 still current?
[B]
[C]
(A)
"G69", "G70"
"G66-18" "G66-19"
(B)
Action
(A)
1
2
(A)
Yes
Go to step 2.
[D]
(A)
1
2
"G66-20" "G66-21"
(A)
No
Ignition switch OFF.
Replace applicable front
seat referring to "FRONT
SEAT" in Section 9.