Suzuki WagonR+ RB310 Service Manual page 1562

DEPLOYED AIR BAG (INFLATOR) MODULE AND ACTI-
VATED SEAT BELT PRETENSIONER
WARNING:
• The air bag (inflator) module and seat belt pretensioner
immediately after deployment/activation is very hot.
Wait for at least 30 minutes to cool it off before pro-
ceeding the work.
• Do not apply water, oil, etc. to deployed air bag (infla-
tor) module and to activate seat belt pretensioner.
• After an air bag (inflator) module has been deployed,
the surface of the air bag may contain a powdery resi-
due. This powder consists primarily of cornstarch
(used to lubricate the bag as it inflates) and by-prod-
ucts of the chemical reaction. As with many service
procedures, gloves and safety glasses should be worn.
• Wash your hands with mild soap and water after com-
pleting the work.
Refer to the procedure described under "DEPLOYED AIR BAG
(INFLATOR) MODULE AND ACTIVATED SEAT BELT PRETEN-
SIONER DISPOSAL" in this section.
AIR BAG SYSTEM 10B-71