Suzuki WagonR+ RB310 Service Manual page 1561

10B-70 AIR BAG SYSTEM
WARNING:
Never attempt to measure the resistance of the seat belt
pretensioners. It is very dangerous as the electric current
from the tester may activate pretensioner.
• Never attempt to disassemble the seat belt pretensioner
(retractor assembly).
• If any abnormality is found, be sure to replace it with new
one as an assembly.
• When an abnormality is noted as existing in the live (inacti-
vated) seat belt pretensioner, be sure to activate it before
discarding it.
• When grease, cleaning agent oil, water, etc., got on the seat
belt pretensioners (retractor assembly), wipe it off immedi-
ately with a dry cloth.
• If seat belt pretensioner was dropped from a height of 30 cm
(1 ft) or more, it should be replaced with a new one as an
assembly.
WARNING:
• For handling and storage of a live seat belt preten-
sioner, select a place where the ambient temperature
below 65°C (150°F), without high humidity and away
from electric noise.
• Never carry the seat belt pretensioner by webbing.
• When placing live seat belt pretensioner on workbench
or other surface, be sure not to put something on seat
belt pretensioner.
Otherwise, personal injury may result.