Suzuki WagonR+ RB310 Service Manual page 1699

7D-12 TRANSFER
Bevel gear shim
ADJUSTMENT
1) Install driven gear bearing outer races, take measurement of
distance "a" between end faces of driven gear bearing outer
races.
2) Measure depth "b" and "c" from mating face of right (left)
case to face processed for installation of driven gear bearing.
3) Calculate shim thickness to be inserted.
Shim thickness = {"b" + "c" – "a" + 0.1 mm (0.004 in.)}/2
4) Select shim(s) closest to calculated value.
Available shim thickness
: 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95, 1.00 and 1.05
mm (0.024, 0.026, 0.028, 0.030, 0.031, 0.033, 0.035, 0.037,
0.040, and 0.041 in.)
1. Right case
2. Left case