Renault Laguna III Manual page 1517

Engine cooling fan assembly: Removal - Refitting
K9K
a Fit the new engine cooling fan assembly fan in rela-
tion to the marks made during removal.
a Refit the bolts on the new fan assembly fan.
a Tighten the bolts on the new fan assembly fan.
II - REFITTING OPERATION FOR PART
CONCERNED
a Fit a cardboard protector to the cooling radiator.
a Fit the engine cooling fan assembly to the cooling
assembly.
a Clip the fan assembly on the cooling assembly.
a Remove the cardboard protector.
III - FINAL OPERATION.
a Refit:
- the intercooler (see 12B, Turbocharging, Inter-
cooler: Removal - Refitting, page 12B-59) ,
- the radiator mounting cross member (see Radiator
mounting cross member: Removal - Refitting)
(MR 416, 41A, Front lower structure),
- the engine undertray,
- the engine undertray bolts,
- the front wheel arch liners (see Front wheel arch
liner: Removal - Refitting) (MR 416, 55A, Exterior
protection),
- the front wheels (see Wheel: Removal - Refitting)
(MR 415, 35A, Wheels and tyres).
a Clip:
- the cooling hoses on the fan assembly,
- the fan assembly wiring,
- the air conditioning pressostat wiring.
a Connect:
- the air conditioning pressostat connector,
- the fan assembly connectors.
a Refit the engine cover.
a Connect the battery (see Battery: Removal - Refit-
ting) (MR 415, 80A, Battery).
COOLING
19A-129
19A