Renault Laguna III Manual page 1538

Coolant pump inlet pipe: Removal - Refitting
V9X
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Separate the expansion bottle outlet cooling hose
clip (1) from the coolant pump inlet pipe using the
tool (Mot. 1448).
a Disconnect the expansion bottle outlet cooling hose
from the coolant pump inlet pipe.
a Remove:
- the coolant pump inlet pipe (2) ,
- the coolant pump inlet pipe seals.
COOLING
REFITTING
I - REFITTING PREPARATION OPERATION
a parts always to be replaced: seal between cool-
ant pump inlet pipe and coolant pump (10,06,01,
22).
a parts always to be replaced: seal between cool-
ant pump inlet pipe and coolant pump inlet
union (10,06,01,23).
II - REFITTING OPERATION FOR PART
CONCERNED
a Refit:
- new seals on the coolant pump inlet pipe,
- the coolant pump inlet pipe.
a Connect the expansion bottle outlet cooling hose to
the coolant pump inlet pipe.
a Fit the expansion bottle outlet cooling hose clip on
137054
the coolant pump inlet pipe using the tool (Mot.
1448).
III - FINAL OPERATION
a Refit:
- the rear inlet manifold (see 12A, Fuel mixture,
- the front inlet manifold (see 12A, Fuel mixture,
- the thermostat (see 19A, Cooling, Thermostat:
- the coolant outlet unit (see 19A, Cooling, Water
- the turbocharger (see 12B, Turbocharging, Tur-
- the lower turbocharger oil supply and return pipe
- the lower engine tie-bars (see 1 9 D, Engine
137053
- the air filter unit (see 12A, Fuel mixture, Air filter
- the damper valve (see 12A, Fuel mixture, Damp-
19A-150
Rear inlet distributor: Removal - Refitting, page
12A-68) ,
Front inlet distributor: Removal - Refitting, page
12A-61) ,
Removal - Refitting, page 19A-89) ,
chamber: Removal - Refitting, page 19A-100) ,
bocharger: Removal - Refitting, page 12B-4) ,
(see 1 2 B , Turbocharging, Turbocharger oil
pipe: Removal - Refitting, page 12B-35) ,
mounting, Lower engine tie-bar: Removal - Re-
fitting, page 19D-85) ,
unit: Removal - Refitting, page 12A-13) ,
er valve: Removal - Refitting, page 12A-39) .
19A