Chapter 8: Upgrading Media Modules And Devices; Adding A Media Module - Avaya G250 Installation And Upgrade Manual

Chapter 8: Upgrading media modules and devices

This chapter describes how to add new media modules and endpoint devices to a G250 that is
already installed. When adding new devices to the G250, consult your project manager for
topology requirements for specific ports to be connected to specific devices.
See one of the following sections:

Adding a media module

●
Adding S8300B modules
●
Adding a LAN device
●
Adding a telephone
●
Adding a trunk
●
Adding a WAN line
●
Adding an Avaya Partner Contact Closure Adjunct
●
Adding a media module
Before adding a new media module to the G250, see one of the following sections:
Adding S8300B modules
●
voice module to the G250.
Adding WAN and LAN modules
●
a WAN or LAN module to the G250.
To install a new module, follow the instructions in
Consult with your project manager to find out if the network topology necessitates installing
media modules in specific slots.
on page 71
on page 72
on page 73
on page 74
on page 75
on page 76
on page 72. Describes important information when adding a new
on page 72. Describes important information when adding
on page 77
Step 2: Install the media modules on page 34.
Issue 1.1 June 2005 71