Table of Contents
Advertisement
DHCP configuration
You can manually set the start and end address range to be used to automatically assign addresses within, the lease time of the
assigned address, the default domain name suffix, primary and secondary DNS server, the primary and secondary WINS server, as
well as the advanced DHCP settings such as NTP, TFTP and Option 150/Option 160 (VoIP options).
OPTION
DHCP Start Range
DHCP End Range
DHCP Lease Time (seconds)
Default Domain Name Suffix
DNS Server 1 IP Address
DNS Server 2 IP Address
WINS Server 1 IP Address
WINS Server 2 IP Address
NTP Server (Option 42)
TFTP Server (Option 66)
DHCP Option 150
DHCP Option 160
Enter the desired DHCP options and click the Save button.
www.netcommwireless.com
Figure 38 - DHCP configuration
Sets the first IP address of the DHCP range
Sets the last IP address of the DHCP range
The length of time in seconds that DHCP allocated IP addresses are valid
Specifies the default domain name suffix for the DHCP clients. A domain name suffix enables users
to access a local server, for example, server1, without typing the full domain name
server1.domain.com
Specifies the primary DNS (Domain Name System) server's IP address.
Specifies the secondary DNS (Domain Name System) server's IP address.
Specifies the primary WINS (Windows Internet Name Service) server IP address
Specifies the secondary WINS (Windows Internet Name Service) server IP address
Specifies the IP address of the NTP (Network Time Protocol) server
Specifies the TFTP (Trivial File Transfer Protocol) server
This is used to configure Cisco IP phones. When a Cisco IP phone starts, if it is not pre-configured
with the IP address and TFTP address, it sends a request to the DHCP server to obtain this
information. Specify the string which will be sent as a reply to the option 150 request.
This is used to configure Polycom IP phones. When a Polycom IP phone starts, if it is not pre-
configured with the IP address and TFTP address, it sends a request to the DHCP server to obtain
this information. Specify the string which will be sent as a reply to the option 160 request.
DESCRIPTION
NetComm Wireless Light Industrial M2M Router Plus
35
Advertisement
Table of Contents
