Set Up The Virtual Device; Example Of The Pid Settings - ICP DAS USA UA-5000 series User Manual

UA-5000 Series User Manual V.1.0.0 ICP DAS

2.4.2. Set Up the Virtual Device

Including the PID setting.

2.4.2.1. Example of the PID settings

In this section, we will describe the PID settings.
The user can also refer the Chapter 3 - System Function Description - Section 3.4 Virture Device to
view all features, properties and configuration notice for each item mentioned in this section.
Step 1
Add all needed variables in the variable table. (See Section 2.2)
Step 2
Set up the driver for the corresponding physical I/O. (See Section 2.4.1)
Step 3
Click on "Virtual Device" > "PID" to set up the PID.
28