Application > Epson Fx Setup - Printronix Auto ID T800 Series Administrator's Manual

Application > Proprinter Setup > 20 CPI Condensed
Compressed print characters are narrower than the normal character set.
This is helpful for applications where you need to print the maximum amount
of information on a page.
Disable
Enable
Factory Default
Application > Proprinter Setup > FF valid at TOF
The FF valid at TOF option determines whether the printer will perform a
Form Feed when the host sends a Form Feed command, if the printer is at
the top of form.
Disable
Enable
Factory Default
Determines how control codes hex 80-9F are handled.
Set 1
Set 2
Factory Default
Application > Epson FX Setup
IMPORTANT
The Epson FX Setup submenu will only be present when the LP+ Emulation
menu is set to Epson FX. Otherwise, this menu will be replaced with the LP+
Emulation menu.
Does not compress print widths, even if condensed
print is chosen by the host.
Prints about 60% of the width of normal characters
when compressed print is chosen by the host
computer.
Enable
Will not perform a form feed when the host sends a
Form Feed and the printer is at the top of form.
Performs a form feed when the host sends a Form
Feed and the printer is at the top of form.
Enable
Application > Proprinter Setup > Alt. Char Set
Interprets data in the range of hex 80 through hex 9F
as a control code.
Prints data in the range of hex 80 through hex 9F.
Set 1
172