Media > Auto Label Map - Printronix Auto ID T800 Series Administrator's Manual

This option determines how the printer handles data that was printing when
an error occurred.
Disable
Enable
Factory Default
This option determines if the printer will warn the user when the print head
approaches its limit in terms of inches printed.
Disable
Enable
Factory Default
Media > Auto Label Map
This option specifies the maximum print width to be used by the application.
The IGP/Auto Label Mapping® feature allows backward compatibility of
programs written for Printronix line-matrix printers. It allows the printer to print
two-up (or other multi-up) labels. Instead of printing multiple labels across the
printer, it prints the leftmost label and the rightmost label, so the printout will
be twice as long but half as wide.
Disable
Enable
Factory Default
Media > Fault > Error Recover
The printer will not reprint the label that was printing
when the error condition occurred.
The printer reprints the label that was printing when the
error condition occurred.
Disable
Media > Fault > Head Warning
Do not show a warning message based on the print
head inches printed.
When the print head reaches a certain limit, a warning
message will pop up.
Enable
Media > Auto Label Map > Select
Excess data in any program sent to the printer with
horizontally adjacent labels that exceed the physical
page width of the printer will be clipped or wrapped
depending upon how the emulation is designed.
The printer will automatically reposition the horizontally
adjacent labels to a vertically adjacent position, or a
combination of horizontal and vertical positions based
on the values selected under the Auto Label Width and
Number Labels menu items.
Disable
76