Host Interfaces; Power - Printronix Auto ID T800 Series Administrator's Manual

Host Interfaces

1. RS-232 at 600,1200,2400,4800,9600,19200,38400,57600, or 115200 baud.
2. USB 2.0
3. Ethernet 10/100
4. Wireless 802.11 a/b/g/n
The RS-232 host interfaces shall have the following characteristics:
Word Length:
Handshaking:
Input Buffer:

Power

Power Source:
Grounding:
Energy Power Saver Mode
Standby
25% Print Density
T800 in Thermal Transfer Print Mode, +15 Intensity, 22degC @ 40% RH
Table 21. Host Interface Characteristics
Selectable 7-bit or 8-bit data format
XON/XOFF (in receive mode only) and
CTS/RTS
Selectable from 1k through 16 kbytes. XOFF
is transmitted and RTS goes low when
buffer is equal to or less than 25% of full.
XON is transmitted and RTS goes high
when buffer is 25% above empty.
Characters are transmitted with no parity
from the printer
Table 22. Power Source and Grounding
115 or 230 VAC 50/60Hz switching power
supply.
Unit must be connected to a properly
grounded receptacle.
Table 23. Power Consumption
203 dpi
14 ips
1.9 Watts
5.4 Watts
90 Watts
300 dpi
12 ips
1.9 Watts
5.4 Watts
90 Watts
238