Printronix Auto ID T800 Series Administrator's Manual page 137

Application > Control > Active LP+ Emul
This function allows you to select the Active LinePrinter+ protocol. The LP+ is
used to print text or jobs that are not associated with any IGP emulation. Refer to
the LinePrinter Plus Programmer's Reference Manual for more information.
P-Series Printronix P-Series language.
P-Series XQ Printronix P-Series XQ language.
Serial Matrix Emulates the Serial Matrix protocol.
Proprinter XL Emulates the Proprinter XL protocol.
Epson FX Emulates the Epson FX-1050 protocol.
Factory Default P-Series
Application > Control > PTX Setup SFCC
Allows you to choose the hex value of the ASCII character you wish to use
as the SFCC for the PTX SETUP command.
Minimum hex 01
Maximum hex FF
hex 21 or the "!" character
Factory Default
Application > Control > PTX Setup Parse
Determines how PTX_SETUP commands as described in the section The
PTX_SETUP Commands are handled within the data stream.
Enable Will parse and execute the PTX_SETUP commands
Ignore Will parse PTX_SETUP commands but ignore them
Will not parse the PTX_SETUP commands so they will
Disable
be treated as normal text.
Factory Default Enable
137