Application > Control - Printronix Auto ID T800 Series Administrator's Manual

Application > Control
This function allows you to activate any IGP emulation listed in the menu.
The IGP emulation can be changed with this menu or by host command if
the current Active IGP emulation supports it.
PGL
VGL
ZGL
TGL
IGL
STGL
DGL
IEGL
MGL
EGL
CGL
Factory Default
The menus for Emulations are described in detail in their respective Programmer's Reference
NOTE:
Manual available at
Application > Control > Active IGP Emul
Printronix Graphics Language.
Emulates the QMS Code-V protocol.
Emulates the Zebra ZPL protocol.
Emulates the Toshiba TEC protocol.
Emulates the Intermec IPL protocol.
Emulates the Sato SPL protocol.
Emulates the Datamax DPL protocol.
Emulates the IER IER-520 protocol.
Emulates the Monarch MPCL II protocol.
Emulates the Eltron Thermal Series protocol.
Available upon special request only.
PGL
http://printronixautoid.com/support/downloads/
134