Network
For detailed information about using the NIC, refer to the Network Interface Card User's Manual.
IMPORTANT
Network menus are saved in the separate section of memory. Loading factory
configuration will NOT reset these items.
Network > Control
This option allows you to set the port number for ASCII print jobs. The data
port number needs to match your host system setting.
Minimum
Maximum
Factory Default
This is the time that the Keep Alive Timer will run. Keep in mind that with the
Keep Alive Timer on, the TCP connection will stay connected even after the
print job has terminated if the host system does not close the connection.
Minimum
Maximum
Factory Default
Network > Control > ASCII Data Port
1025
65535
9100
Network > Control > Keep Alive Timer
0 minutes
10 minutes
3 minutes
114