Printronix Auto ID T800 Series Administrator's Manual page 164

Application > P-Series XQ Setup > Gothic Typeface
Controls which host command sets Gothic printing.
Char 02 STX
Char 03 ETX
Char 09 HT
Factory Default Char 02 STX
Application > P-Series XQ Setup > EVFU Select
Controls how the printer handles vertical formatting.
Disable Disables all EVFU processing.
Selects P-Series compatible Electronic Vertical Format
Enable
Unit (EVFU).
Factory Default Enable
Application > P-Series XQ Setup > Upr. Case Select
Controls how the printer handles lowercase characters it receives from the
host computer. When enabled, all characters are printed in uppercase.
Prints lowercase characters received from the host
Disable computer as lowercase; prints uppercase characters
received from the computer as uppercase.
Prints lowercase characters received from the host
computer as their corresponding uppercase
Enable
equivalents; prints uppercase characters received
from the computer as uppercase.
Factory Default Disable
Application > P-Series XQ Setup > Slew Relative
"Slewing" is rapid vertical paper movement. This parameter determines the
number of lines slewed (either 1-15 lines or 1-16 lines) when an EVFU Slew
Relative command is received.
1-15 lines
1-16 lines
Factory Default 1-15 lines
164