Printronix Auto ID T800 Series Administrator's Manual page 144

Application > PGL Setup > Ext Execute Copy
Determines if dynamic text or overlay data is allowed when the Form Count
parameter (number of forms to print) is used as part of the EXECUTE
command.
Disable
Enable
Factory Default
IMPORTANT
Application > PGL Setup > AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
Disable
Enable
Factory Default Disable
Application > PGL Setup > Select SO Char
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate
set of control function characters. See the description of the Code 128
barcodes in the PGL Programmer's Reference Manual for details.
Minimum
Maximum
Factory Default
Dynamic data, overlay data, etc. are not allowed if the
optional Form Count parameter is specified (IGP-100
compatible).
Dynamic data, overlay data, etc. are allowed within a
form where the Form Count parameter is specified. In
this case, the same form is printed for whatever the
Form Count is.
Disable
When enabled, incremental data is not
incremented since the printing page is the same.
Overlay data is only printed with the first form and
not on subsequent forms, and each form is printed
on a separate page.
The printable data field is printed with the AI enclosed
in parentheses. This is the standard EAN/UCC-128
format.
The printable data field is printed with the UCC fields
separated by spaces. This option is IGP-X00
compatible.
0
255
14
144