Printronix Auto ID T800 Series Administrator's Manual page 141

Application > PGL Setup > Autowrap
This parameter determines if text will wrap to the next line when the line of
text exceeds the right margin.
Truncates the text beyond the right margin until a CR
Disable
or CR + LF is received.
Enable Automatically inserts a CR + LF after a full print line.
Factory Default Disable
Application > PGL Setup > Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
Disable The printer will print text in upper and lowercase.
Enable The printer will print text in uppercase only.
Factory Default Disable
Application > PGL Setup > Slash 0
This parameter allows you to print the numeral "0" with or without the slash.
Disable Zero is printed without a slash.
Enable Zero is printed with a slash.
Factory Default Disable
IMPORTANT
This option does not apply to OCR A or OCR B.
Application > PGL Setup > Select SFCC
You can specify which decimal code (1-255) will be used as the Special
Function Control Code (SFCC). The SFCC denotes that the following data is
a PGL command.
Minimum 1
Maximum 255
Factory Default 126
141