Setup; Setting Up The Printer - Printronix Auto ID T400 Administrator's Manual

3. Setup

3. 1 Setting up the Printer

Note:
* Please switch OFF (O) printer power switch prior to plug in the power cord to printer power
jack.
- 10 -
1. Place the printer on a flat, secure
surface.
2. Make sure the power switch is off.
3. Connect the printer to the computer
with the provided USB cable.
4. Plug the power cord into the AC
power cord socket at the rear of the
printer, and then plug the power cord
into a properly grounded power
outlet.
P220 123-0 0 1_ C