Media > Ribbon; Media > Tof - Printronix Auto ID T800 Series Administrator's Manual

Media > Ribbon
When enabled and the amount of ribbon remaining on the supply spindle is
approximately 75 to 50 meters or less, a "Ribbon Low" warning will pop up on
the ONLINE screen.
Disable
Enable
Factory Default
Media > TOF
Allows selection of three different TOF (Top-of-Form) detection faults. The
printer displays a Gap Not Detected fault and stops printing when media has
advanced a distance equal to X or more times Media > Image > Label Length.
1 Label
3 Labels
9 Labels
Factory Default
IMPORTANT
Media > Ribbon > Ribbon Low
No Ribbon Low warning will appear.
The Ribbon Low warning will appear when the ribbon
on the supply spindle is 75 meters or less.
Disable
Media > TOF > TOF Detect Fault
The Gap Not Detected fault is declared after 1 label.
The Gap Not Detected fault is declared after 3 labels.
The Gap Not Detected fault is declared after 9 labels.
3 Labels
The correct Label Length value, equal to the
physical length of the installed label, must be
entered in Media > Image > Label Length.
73