Media > Image > Intensity Shift
This menu can be used to shift Print Intensity settings higher or lower. This
allows for higher print intensity settings for certain media while maintaining a
compatible Print Intensity value set by the host job. It can also be used to
make slight adjustments for compatibility with other emulations.
Minimum
Lighter -9
Maximum
Darker +9
Factory Default
0
While the shift can swing -9 to +9, the actual print
IMPORTANT
intensity value is bounded with a minimum of -15
and maximum of 20.
Media > Image > Paper Feed Shift
This option represents the distance to advance (+ shift) or pull back (– shift)
the stop position of a label when Tear-Off Strip, Peel-Off, or Cut Media
Handling option is enabled. Allows .01 inch increments.
Minimum
-1.00 inches
Maximum
Current Label Length (or 12.80 inches maximum)
Factory Default
0.00 inches
The pull back (- shift) will be limited to the print line
position in order to prevent media from being
IMPORTANT
pulled back beyond the print head and falling off
the platen roller.
62