Media - Printronix Auto ID T800 Series Administrator's Manual

Media Handling
Tear-off
Peel
Cutter

Media

Type
Supply Roll
Label Material
Media Sensing
Label Peel-Off
Label Taken Sensor (part
of the Peel Option)
Maximum Max Print
Width
Label
4.4 in
4.4 in 3 ips nom
4.4 in 4 ips nom
Table 15. Media - General Information
Roll-fed, die-cut continuous or fanfold labels, tags or tickets;
most direct thermal or thermal transfer materials.
5 inch (127 mm) maximum diameter on 1 inch (25.4 mm) to 1-1/2
inch (38 mm) diameter cores.
Thermal transfer plain-coated papers, vinyl, Mylar, metallized
paper, non-woven fabric, fine woven fabric, thermal-visible light
scannable paper, infrared scannable paper, thermal ticket/tag
stock, thermally-sensitive plastic stock.
Mark sensor horizontally moveable sensor. Gap sensor fixed
position centerline of printer. When set to Mark, it senses a black
mark on the underside of tag or label stock, or notch on side. Gap
sensor recognizes the inter-label gap by shining light through the
linter. When set to Disable, it senses no label indicators or
ignores all existing label length indicators on the installed media.
Peels and presents label to the operator, one at a time.
Detects when a printed label is at the printer exit throat. Used
only for Peel-Off Media Handling mode.
Limitations
Speed
8 ips -
Not compatible with
RFID
Not compatible with
RFID
234