Host Io; Host Io > Control; Host Io > Usb Port - Printronix Auto ID T800 Series Administrator's Manual

Host IO

Host IO > Control
This option allows you to send print jobs through any interface with auto-
switching selected as host interface. It also allows a particular interface from
the menu to be selected.
Auto Switching
Serial
Ethernet
USB
Factory Default
Host IO > USB Port
This option configures the amount of memory allocated for the USB buffer
incremented in 1 Kbyte increments.
Options
Factory Default
This is the timeout value used for the current port to then check the other
selected port types for data to print. When the printer has not received data
from the host after a certain period of time, it needs to time out in order to
service the other ports. This submenu is only available when Host IO >
Control > Interface is set to Auto Switching.
Minimum
Maximum
Factory Default
Host IO > Control > Interface
Automatically switches interface when host data is
sent to that interface (and any job in progress is
completed).
Serial RS-232
Ethernet Interface
USB Interface
Auto Switching
Host IO > USB Port > Buffer (Kbytes)
1, 16, 32, or 64
16 Kbytes
Host IO > USB Port > AutoSW Timeout
10 second
60 seconds
10 seconds
102