Printronix Auto ID T800 Series Administrator's Manual page 143

Application > PGL Setup > Var Form Type
This parameter allows you to manipulate forms created with the CREATE
command to include variable form length parameters.
Add Nothing When selected, no action is taken.
When selected, the form length ends at the longest
Add ;0
printed element. (Same as ~CREATE;filename;0).
When selected, the form length is set to match the
Add ;X
value in Media > Image > Label Length.
Factory Default Add Nothing
Application > PGL Setup > Skip Cmd Prefix
Stands for Skip Command Prefix. This parameter determines if the printer
will print any data before a PGL command is received.
Disable The printer will print all data before a PGL command.
Enable The printer ignores all data before a PGL command.
Factory Default Enable
Application > PGL Setup > Ignore Text
Determines if text in NORMAL mode will be printed or ignored.
When disabled, text in normal mode will be printed.
Disable Attributes to be printed depend on the PGL Normal
menu setting.
When enabled, any line of text (non-PGL commands)
Enable
in normal mode will be ignored.
Factory Default Disable
143