Example 2: Uneven Number Case
Problem: A file has been constructed with three horizontally adjacent 2.0" labels. The user now desires to
use this file with a printer that has a 4.0" physical width.
Solution #1 with Menu Settings:
•
Set Media > Auto Label Map > Auto Label Width to "2.0" (the width of each labels)
•
Set Media > Auto Label Map > Number Labels to "2"
•
Set Media > Auto Label Map > Select to "Enable".
Printer Operation for Solution #1: The printer will print the first two labels at the same time. These first
two labels will be horizontally adjacent. Once these labels have been completed, the printer will print the
remaining 2.0" labels along with a blank 2.0" label. See figure below.
Solution #2 with Menu Settings:
•
Set Media > Auto Label Map > Auto Label Width to "2.0" (the width of two labels)
•
Set Media > Auto Label Map > Number Labels to "3"
•
Set Media > Auto Label Map > Select to "Enable".
78