Printronix Auto ID T800 Series Administrator's Manual page 156

Application > P-Series Setup > Primary Subset
Application > P-Series Setup > Multinational
Application > P-Series Setup > DEC Mult.
One of these menus may be available when the Character Group is
Standard Sets. The menu bolded in the right column below is unhidden and
will have options with defaults marked (*). If the Character Set option is not
shown in the left column, none of these menus is available.
Primary Subset
ASCII (USA) *, French, German, English, Danish,
Character Set =
Swedish, Italian, Spanish, Japanese, French
IBM PC
Canadian, Latin American, Norwegian, Danish II,
Spanish II, Latin Am II
Multinational
Character Set =
Multinational
ASCII (USA) *, EBCDIC
Primary Subset
Character Set =
ASCII (USA) *, German, Swedish, Danish, Norwegian,
ECMA Latin 1
Finnish, English, Dutch, French, Spanish, Italian,
Turkish, Japanese
DEC Mult.
Character Set =
ASCII (USA) *, French, German, English,
DEC Mult
Norw./Danish, Swedish, Italian, Spanish, Japanese,
French Canadian, Dutch, Finnish, Swiss
Factory Default As shown with asterisk (*).
Application > P-Series Setup > Extended Subset
One of these menus will be available when the Character Group is Standard
Sets. The menu at the right column is unhidden and will have options as
shown with defaults marked (*).If the Character Set option is not shown in
the left column, no menu is unhidden.
Extended Subset
Character Set =
IBM PC
Code Page 437 *, Code Page 850
Extended Subset
Multinational *, Barcode 10 cpi, Mult. DP 10 cpi, Mult.
Character Set =
DP 12 cpi, Mult. LQ 10 cpi, Greek DP 10 cpi, Greek DP
ECMA Latin 1
12 cpi, Greek LQ 10 cpi, Grap. DP 10 cpi, Grap. LQ 10
cpi, Sci. DP 10 cpi, Sci. DP 12 cpi, Sci. LQ 10 cpi
Factory Default As shown with asterisk (*).
156