Printronix Auto ID T800 Series Administrator's Manual page 99

System > Printer Mgmt > PNE Port Number
This menu selects the port number that the printer expects PNE to connect
through.
Minimum 1025
Maximum 65535
Factory Default 3001
System > Printer Mgmt > PNE Port Timeout
If PNE has not communicated to the printer within a timeout period, the PNE
session closes.
Minimum 1 second
Maximum 255 seconds
Factory Default 100 seconds
System > Printer Mgmt > Mgmt Port Number
This menu selects the port number that the printer expects the PXML or UCP
to connect through.
Minimum 1023
Maximum 65535
Factory Default 3007
System > Printer Mgmt > Mgmt Protocol
Since PXML and UCP management protocols share the same Ethernet port,
only one can be active at a time. This menu selects the active Management
Protocol Interface, either PXML or UCP.
Printronix XML management protocol used to control
PXML and manage the printer. See the XML Programmer
Reference Guide for more information.
The Universal Control Port that can be used for GPIO
UCP
or CST applications.
Factory Default PXML
99