Printronix Auto ID T800 Series Administrator's Manual page 148

Application > PGL Setup > Lead PDF Dist
Adjusts the leading and trailing character spacing distance of the PDF for
UPC/EAN barcodes. The value can be modified in 0.01 inch increments.
Minimum 0.01 inches
Maximum 0.10 inches
Factory Default 0.10 inches
Application > PGL Setup > Trunc Dyn Data
This menu allows the user to truncate the dynamic data up to the maximum
data length specified in Create Mode.
If the dynamic data exceeds the maximum data length,
Disable
an error will report.
If the dynamic data exceeds the maximum data length,
Enable
the data truncates.
Factory Default Disable
Application > PGL Setup > Boundary Check
This option turns on or off the page boundary check for all print elements.
No out of bound error is reported. The out of bound
Disable
print element prints over the page boundary.
An out of bound error is reported if the print element is
Enable
out of the page boundary.
Factory Default Enable
Application > PGL Setup > Preparser
Allows you to send preparser commands to the printer through any port.
Disable Not using the Preparser command.
The preparser command can be accepted from any
Enable
port.
Factory Default Disable
148